Jump to content
SAU Community

Recommended Posts

Okay guys. I have been searching and searching and have been unable to find what I am looking for.

Esentially what I want is a two step launch controller for my GTR33. I want the type that allows boost to be built at a standstill so that you come off the line with full boost.

I know that the Power FC pro has a type of launch controller, however I dont believe it does what I am looking for. That plus the fact the discontinued the FC Pro. I also know that Bee-R has a rev limiter, however I believe that ALSO does not allow you to build boost on the line.

So, if someone could recommend one to me it would be GREATLY appreciated. Thanks.

-Sayajin

Link to comment
https://www.sau.com.au/forums/topic/153794-two-step-launch-for-gtr33/
Share on other sites

anything with a zero speed ignition cut should allow you to build boost. I know it works on my emanage ultimate

Such as what unit? Reason I ask is I am currently on the Power FC so I cant get a new stand alone just for launch control.

-Sayajin

Humm... this is a bit different from what I had heard before..

So I can set the rev limit to 6500RPM, stand full on the gas and it stays at the set RPM, and builds full boost while still on the line?

-Sayajin

yep got it in one. you have 2 rev limits one is a stationary (launch) rev limit that usualy is engaged either when speed = 0 or when handbrake is engaged. once speed is above 0 or handbrake is dropped it reverts to the usual rev limit. so you can set limit one to 6500rpm if you wish for launch, then limit 2 to 8000rpm for driving. as for whether it will build full boost I'm not so sure of that. it will build some boost though.

Okay guys. I have been searching and searching and have been unable to find what I am looking for.

Esentially what I want is a two step launch controller for my GTR33. I want the type that allows boost to be built at a standstill so that you come off the line with full boost.

I know that the Power FC pro has a type of launch controller, however I dont believe it does what I am looking for. That plus the fact the discontinued the FC Pro. I also know that Bee-R has a rev limiter, however I believe that ALSO does not allow you to build boost on the line.

So, if someone could recommend one to me it would be GREATLY appreciated. Thanks.

-Sayajin

It's hard to go past the MSD 2 step...

Ever used the Gizmo Paul? Now that you mention it I remember reading about it QUITE a while ago. I only ever heard of one person using it however so I am unsure on how well it works.

Any first hand experience?

*edit*

After reading the Apexi page all I can say is WOW.... Sounds like exactly what I want. Hell it even has flat shifting! (no lift to shift).

Also I read that it integrates with the shift light. Does that mean in order to get the Gizmo to work I need the shift light as well? Or just means it CAN work with it?

-Sayajin

Edited by Sayajin

no sorry, never used it. when i get an evo i will get one for sure

i see no use it for in my skyline (rear wheel drive & stock ceramic exhaust wheel)

from memory youll need or want;

stand alone ecu or good remap

steel wheel exhaust wheel

no cat

exhaust temp gauge might be a good idea

good traction

yeah its a nice device hey

yeah the shift light is optional that i can see

on the evo forums theres a video of one dude that has a 2 step spark cut limiter. the video shows the car stationary with 1.3 bar ready to go and lotsa flames out the exhaust

Humm.. well I have been reading around and it appears that the shift light is REQUIRED in order for the launch interface to work.

The Tach recall intercepts the RPM line from the ECU. This allows you to control your 2 shift points, warning and shift now - and also the launch.

A 5V signal is sent from the tach recall light to the launch control interface when the desired rev point for launch is reached.

Still seems like a great thing. I just personally feel the shift light is a bit too ricey for myself. I may have to make an exception however. That or just remove the bulb in the light. lol.

Or if someone else has something better that is just as well!

Thanks for the info Paul.

-Sayajin

Edited by Sayajin

Something you may want to think about is how is it actually limiting the rpm....

Yes some of the ECUs may have an option to hard / soft cut - fuel / spark but the million dollar question is how crudely they apply that limit.

My Haltech has these features too but I am planning to rely on the 2 step functionality built into my MSD DIS4

The reason I recommended the MSD is because the MSD alternates the cylinders it drops and some cheaper rev limiters may only drop the same cylinder causing fuel build up in that cylinder. Just make sure the ECU you plan to use alternates the cylinders.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...