Jump to content
SAU Community

Recommended Posts

Wow finally read it all, took around 2-3 weeks haha. Awesome thread!

Anyhow, I have a spare RB30 short motor if anybody is interested in adelaide. It's a S2 from an R31 and appears to be good condition. I bought it to do the conversion, but have since purchased a different motor to use for ease and because of money. haha.

Yeah, its all here minus the sump so if anyone is interested for a conversion just send a PM!

Jack

Brad, keep a set of CP RB30 9:1 pistons and Spool rods for me. Through sheer luck a 26 head and intake manifold dropped into my lap so I might as well build another and offer someone the gift of 26/30 goodness.

Hey guys. I made a topic out of this but havent yet got a a reply and thought this might be a better place to ask the question. I hope thats ok

Recently i got my fully built rb25/30 up and running after a year long build. The only untouched component in my engine bay is the fuel rail everything else is either aftermarket or had work done to it. I'm using a haltech e11v2 ecu & atm the car is load limited. Basically what happens is at 6,500rpm the engine will stop reving any faster unless the wheels are spinning in which case the load is taken off the engine and it will rev out. Its not a harsh limiter it just will stop revving any faster and the exhaust sounds like it flutters very fast. The ecu has an inbuilt rev and boost limiter but they are both set above wastegate pressure & the current rev limit.

I didnt relise until recently but i found out a few of my mates using different model haltechs have had numerous issues. I now know i should of cashed out the extra money and gone a motec but whats done is done. Rob at 101 is a really smart guy and he told me he'd be able to work it out eventually but the longer he spends working it out on the dyno they more my bill will be. I was hoping someone else might of come across this before and already worked out the answer.

Hey guys. I made a topic out of this but havent yet got a a reply and thought this might be a better place to ask the question. I hope thats ok

Recently i got my fully built rb25/30 up and running after a year long build. The only untouched component in my engine bay is the fuel rail everything else is either aftermarket or had work done to it. I'm using a haltech e11v2 ecu & atm the car is load limited. Basically what happens is at 6,500rpm the engine will stop reving any faster unless the wheels are spinning in which case the load is taken off the engine and it will rev out. Its not a harsh limiter it just will stop revving any faster and the exhaust sounds like it flutters very fast. The ecu has an inbuilt rev and boost limiter but they are both set above wastegate pressure & the current rev limit.

I didnt relise until recently but i found out a few of my mates using different model haltechs have had numerous issues. I now know i should of cashed out the extra money and gone a motec but whats done is done. Rob at 101 is a really smart guy and he told me he'd be able to work it out eventually but the longer he spends working it out on the dyno they more my bill will be. I was hoping someone else might of come across this before and already worked out the answer.

The answer to what?

What's the question/problem?

have an rb30 twin cam in a 32 and would like to put a brake master cylinder brace on but with the different height of the motor i'm thinking the off the shelf ones won't fit?

what have other people in my position done?

Cheers!

I have a Cusco master cylinder brace and it all fits fine with the rb30 in there.

ah cool, thought u may have had issues with the different heights of the motor.

Where did you and scooby get yours from?

Do u have pics, i may have a go at making one myself.

Cheers!

Hi Ash, got mine from Jap auctions. I've got a spare Nismo one without the stopper you can have for $50 plus postage. Probably not worth making one for that price I just don't need it.

what exactly is the stopper? do i need it and will it suit a 32?

Has anyone fitted a high energy HE2112 VL 3.0L Commodore Super Pan $458.53* into a 32 without having to use a custom made front sway bar?

http://highenergy.com.au/index.php?module=...5539231984-1177

1105702755453-8851.jpg

A few pages back, Al had problems with his HE8124 Pro-Circuit 3.0 VL/Nissan, 4 Gates, 7L, P/Up clearing the sway bar.

Well, my engine had its "dummy fit" yesterday and all the clearances etc checked. All good to be assembled next week. I'm starting to think i should of gone 280 cams instead of the 264/272 option after reading around the net. One thing that was picked up was i have a R34 RB26 head and i got cams to suit the R32/33 RB26 head for ease of finding a crank angle sensor later on. Well the HKS valve springs to suit my cams held 7psi less than the R34 factory valve springs. I now have aftermarket ones that almost hold double the pressure. This stuff is way over my head but by memory, the HKS springs held 38psi so the stock ones were 7 psi above that and the new ones (can't remember the brand) held 75psi. I don't know what these numbers mean but more is better i presume. The ATI balancer looks pretty too. I hope my stall converter is big enough for the T04z as well.

I am finding it hard to choose between the Haltech E11 v2 or EMS 6860. Any help from you guys would be appreciated. The car will be primarily a drag car. I am wanting to have a low boost level for 1st and then a higher setting for 2nd and top gears. Also i would like to run 2 seperate maps if possible maybe even 3 switchable seperate maps.

Cheers

Steve

Well mine is back on the road; but in run-in tune. :D

Couldn't be happier, i keep grinning every time i press the GO peddle.

Below is a few pics of the completed engine bay and the run-in tune. The boost is very responsive, and that's only controlled by the actuator (no bleed valve, EBC or restricters) Once i have completed 1000km, it will be wound up to 20psi, then the fun really begins :)

post-1811-1205083276_thumb.jpg

post-1811-1205083313_thumb.jpg

post-1811-1205083333_thumb.jpg

post-1811-1205083352_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...