Jump to content
SAU Community

Recommended Posts

Ok. I have taken pretty much everything off.

So with my EBC i can just remove the aftermarket boost solenoid and plumb up the stock one? If i just hide the avcr in the cabin somewhere so i dont have to remove all the wiring and crap. Will this be ok?

My only question with the intake and exhaust stuff is everything is stock now other than FMIC. Which is my 1 intake mod.

And i also have an aftermarket dump pipe, and then the rest of the exhaust is standard. Is this ok?

depends how much noise it makes as to whether or not it willl be ok

you could try just hiding the avcr but id guess if they see any wires they might be like whats this and then go looking for it etc..

When I went I had my PFC hand controller hidden under the dash and the wiring for my boost controller taped up. They won't find it. One thing they will do is connect their diagnostics machine to a plug that is near the drivers side kick panel so don't be scared if they are looking around there

Can anyone confirm who has had to get the emissions test done recently that a FMIC is ok with standard airbox?

I have changed to standard zorst, BOV, etc. Just need to know about the cooler????

I wanted to install a fmic in my 33 but when i went to my mech today, they reckon that there is a new law about "if ur intercooler will need to cut off part of the bodywork to install then it's illegal, whether or not u have a pod filter" I'm not too sure about this, but it did spoil my day... :happy:

I know there are links on what is legal and what is not on the first page..But as we know road rules changes from time to time, and it was posted like 2 years ago. Not saying that it's irrelevant, but it's sorta out of date, and the link "Thread on legal/illegal Mods in VIC can be found here" is also not working anymore.

Edited by toshirokato

I don't think that's a new rule...

You can supposedly modify the front removable bumper (ie larger hole), but structural changes to the sheet metal underneath is a no-no.

(at least that is my understanding)

You could get an engineer to sign off on the modification though (as I did!)

toshirokato - If you car came with AIRBAGs - then you cannot modify it at all, no engineer will be willing to signoff.

If you do NOT have AIRBAGs, then you are fine... worst case get an engineers cert and it'll be signed off.

However always consult/discuss this with your engineer of choice first :D

Hey all,

Forgive me if it has been asked before.

Is it doable to get a RWC with wide body kit (I'm certain it's made of fibreglass)?

Fibreglass bonnet is ok as long the car is older than 1996 correct?

Cheers

Grant

toshirokato - If you car came with AIRBAGs - then you cannot modify it at all, no engineer will be willing to signoff.

If you do NOT have AIRBAGs, then you are fine... worst case get an engineers cert and it'll be signed off.

However always consult/discuss this with your engineer of choice first :D

We know this is not true. LukeB got a engineers certificate with the hole for his intercooler piping in an R34 which all came with airbags. I got his number if you want it toshirokato

My mate got a road worthy with fibreglass front and rear quarter panels without a problem.

Hmm... could you PM me the RW testers details?

grant i have heard that widebodys are actually not legal but ive never heard of anyone getting done... ring vicroads perhaps?

I've read about it on NS.com (I know it's not the best place to get sensible answers), yeah I'd better off ring Vicroads and ask when I can be arsed.

Thanks.

epa and car being in a rwc is two different things you can rock up to a epa station slammed, tyres sticking out, no bumper bar, rust, cage all they care is if you pass the epa test not car being in a rwc state.

just got served my 1st EPA notice. :(

anyway a fwe quick question,

1) do i have to swap out my exhaust if i reckon it could pass the noise test? it isn't noisy but it is low, though above the 100mm minimum mark.

2) how many EPA notice can i be served in a year???

Edited by Dostalgia
1. I highly doubt it'll pass, but meh, costs ya $35 or something to get a test done. Then another $35 when ya go back (some places dont charge).

2. Ring the EPA.

Thanks mate~

call the exhaust shop on brunswich, kind of friendly guy answered the phone, told him i had a performance exhaust and was served an EPA notice, asked for advise on what to do, and was asked to drop in tomorrow morning for him to check it out. Will update back on this thread on what advise was given.

also i had a shop that would charge 100bucks to swap back to a standard exhaust for EPA, so would that be considered cheap or expensive? am living in the north melbourne area.

Update from the trip down to exhaust shop on brunswich west, was told i have to change to a stockie before he would pass it. He didn't even hear the exhaust note, but won't pass me anyway because it sits too low.

so right now, i am on a hunt for exhaust shop to do a swap :whistling:

if there is anyone with contacts or any place near north melb do give me a PM! Many thanks in advance~

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...