Jump to content
SAU Community

Recommended Posts

Skyline was EPA'd last night. I question how it was tested (near a wall) but I'm trying to consider my options. The letter is coming in the mail so I'll have a little while to sort it out. It measured 91dB at 4800rpm on acceleration, 96dB on deceleration. It surprises me as even the tester agreed it didn't sound loud. So it's only

just over until I back off (not that I ever really do the RPM it was tested at :yes: )

I'm figuring if I do the swap for stock exhaust trick I'll get done again seeing as I drive the car every day and I'll now be on the EPA's target list. What options for a slim second muffler do I have? My issue is clearance, which is why I had it removed when I bought the car.

The EPA guy knew quite a bit. Even noticed my boost control solenoid was bypassed, which is something I had never noticed. I knew it ran higher than stock boost but never knew exactly why. I suppose I should be thankful that car is otherwise stock aside from the exhaust and all they were testing was noise.

did you get a fine to go with it?

i wouldnt worry swap it over, clear it and go back to what you have they dont have a "target" list so thats the best advice.

think how many times you've been done in all the time you've had modified car

You're right, I've owned modified cars for a while and I've never had an issue.

No fine, he said he wasn't going to fine me, only warn me. Probably because I was being honest and cooperative. Kept asking me if it was my car, that was annoying.

I just think swapping the exhaust over mightn't be the best idea as I drive the car every day and I'm bound to get done again. I'll speak to the exhaust shop about adding a hotdog and see if that would get it legal?

doubt it will make it legal the shop will just be happyto take ya money best thing is to have a spare stock exhaust and play the game its wierd how they keep asking is it your car i hate that what if u say no? they leave u alone i doubt it haha

It should have not been done against the wall. They just wanted to f**k you over. It would have picked up reverb and everything. They test it at 4800rpm for an rb25det. Main EPA centre parks it in the middle of a carpark and measure it there.

It was sideways to a wall, the wall was about 3m away (the microphone was closer to it.) Look, to be honest, it was possibly a few dB higher than the limit on back-off, but I think the wall may have echoed the sound a bit. I'll get it tested before I go and modify anything in the exhaust/get a stock exhaust.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...