Jump to content
SAU Community

Recommended Posts

They will always get worse.

Hence build the car to be as legal as possible. And if not, reduce swap-over time.

In less than 60mins I can have my car legal. And even then it's hard to pick initially anyway.

Smart modding = win.

Does that hour include whatever is required to pass a full epa and full rwc?

It now would take me just over an hour to pass noise and rwc but passing a full epa would not be so easy.

I used to pass rwc, noise epa and full epa with 2871r turbo im my old s15, so as long as it mounts like standard turbo and looks similar, they dont pick on it.

I also passed full epa with PFC. Work that one out! Of course no hand controller.

  • 3 weeks later...

GDAY LADS

I got my R33 out of storage after 2 years.from what ive heard you cant have any induction mods now. I remember you used to be able to have either a pod filter or an FMIC im guessing its changed now.

Its the same as its always been, 1 mod.

got pulled over for having my fog lights on, then defected... be careful lads

Was there fog or low visibility (apart from being night)? if not its illegal to use them, always been that way, they are f**king annoying for oncoming drivers and barely more than wank factor for the car that has them.

GDAY LADS

I got my R33 out of storage after 2 years.from what ive heard you cant have any induction mods now. I remember you used to be able to have either a pod filter or an FMIC im guessing its changed now.

where did you "hear" this from?

It's factually wrong.

Was there fog or low visibility (apart from being night)? if not its illegal to use them, always been that way, they are f**king annoying for oncoming drivers and barely more than wank factor for the car that has them.

It was raining, I find it easier to see the wet road with the fog lights on. But by the time I got pulled over (about 2 mins later) the rain had stopped. Personally I don't think they are bright enough to cause a distraction, but the law is the law. I got off lightly with the defect though.

Hey, my future track car (R33 GTST I bought form interstate a while back) has been taken back to standard. It now has RWC and I've booked it in to get the plates.

So, I book it in, and depending on VIN #, it determines the type of 'inspection' the vehicle gets. Of course, my car has to undergo the more expensive inspection (only $40) which makes me wonder - what does the inspection consists of? The Vic Roads lady gave me a nondescript answer (she was either dodging the answer or had no idea).

Will Vic Roads just check the engine/chassis #'s, or is it more strict? Are they going to go over it with a fine-tooth comb?

Anyone know?

They simply check the engine number.

That's all the "extra" inspection is. I got told when i re-rego'd the GTS-R that as it was a grey import, it was "high risk" and needed this inspection. Turned out to be essentially fvk all.

They simply check the engine number.

That's all the "extra" inspection is. I got told when i re-rego'd the GTS-R that as it was a grey import, it was "high risk" and needed this inspection. Turned out to be essentially fvk all.

Good to hear.

Where's the engine number on the R33 GTST? 'Cos I know I'll need to show them where to look....

Never heard of having to pay extra for an inspection, no need to show them the number they have a book telling them where it should be.

Yep, paid it....

Last time I had to ring someone to find out where the engine number was - the woman inspector had no idea.

YAY! got rego on the car.... but the inspector made me sweat.

He said that most interstate cars don't have the compliance Chassis number stamped on the body, just on the plate. It just so happens my car had the chassis number stamped on the strut tower - otherwise I wouldn't be able to rego the car there and then!

  • 1 month later...

Quick question; recently got a letter in the mail for EPA (exhaust noise).

As for the actual procedure; book ($40.30, sigh... apparently going to go up $1 after July 01 lols) at an approved noise tester (list that came with the mail) and get the certificate of compliance for noise.

Then I have to physically hand this certificate in at the EPA in Carlton? Do I need to book for that if so?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...