Jump to content
SAU Community

Recommended Posts

I was coming back from the gym at monash yesterday, and I decided to rev it to 100km/h on the fwy ramp. But it seemed like the clutch was slipping or something. Here is what happened...the revs were climbing, the speed was not climbing...and the car was getting twitchy. Mine has only got 164rwkws, with a turbo back exhaust and pod. Surely this is not powerful enough to give wheel spin on a straight line and on a dry road (cos its never happened before). Is my clutch on the way out? Or is it just that my tyres are not tready enough?

Mind you, after that I drove carefully.

Also - is it normal for black smoke to come out when revving? Apparently there was some smoke that came out when i hit the fwy ramp (my friend was travelling behind me).

Thanks all

Ps: http://www.skylinesaustralia.com/forums/in...clutch+slipping

i think its similar to what this guy experienced...so im tending to believe that it could be my clutch..but id like any opinions.

And if so, what model of the exedy clutch would be good (bear in mind, im thinking of doing mods later this year).

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/
Share on other sites

yeah sounds like shes shagged. go for the exedy hd cushion 8 button clutch there really good. i got one and its not to heavy not to light an the missus can still drive it. apparently they can handle up to 300rwkw

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2912773
Share on other sites

let me know how long the button clutches last with everday driving. they grip very well but I found that it wore my flywheel out as well as the disc but mostly the flywheel. I all for brass/ceramic friction materials but not for everyday driving. I'll stick to HD organic or twin plate, but thats only my opinion they get better everyday with there designs.

a good way to tell if your clutch is slipping is to get on the high/freeway at about 100ks in 4th or 5th, moderately warm and keep the throttle flat so the cars under full load then fan/feather/kick the clutch ( quickly tap it down past friction point then release) and if your revs go up( they will a little but only due to the clutch being pushed in) and with the clutch pedal all the way out continue to rise then yeah its on the way out, or take it to a workshop but it sucks to not know exactly what people mean, its good to experience it for yourself so that your learn.

Edited by mattymagoo22
Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914278
Share on other sites

crazy..thanks for the replies :)

i will check some more...i still got till june before i get my next service...so i will test it till then. but yeah, that day it was just acting wierd - either there was no traction or its likely that the clutch is flocked

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914347
Share on other sites

hey there,

after a drive do you smell anything burning? if you do, it could be clutch burn.

a few months ago my clutch started to slip in 4th, but the longer it went on, it started to slip in 3rd...2nd then finally it was starting to slip in 1st. once its gets to 1st gear, the clutch is on its last legs.

i think if you can? take ur car to the clutch specialists in your state, and ask them to check your clutch for u. it really shouldnt cost you anything. got my clutch changed with a xtreme heavy duty cushion button. they are 25% heavier than stock. they are grippy and require an "on or off" engagement. not too bad for street driven cars.

cheers

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914433
Share on other sites

Clutch slip is fairly easy to diagnose against wheelspin, with clutch slip the car will go practically nowhere (you won't feel any acceleration), whereas wheelspin you'll still be generally accelerating.

A lot of black smoke out the back will be clutch dust. You can usually smell it too if you did a good job. Time for a new clutch if it keeps happening. They usually get worse with time, so see how you go, and if it gets worse then its time for a better clutch.

Fixxxer

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-2914475
Share on other sites

  • 4 years later...

I replaced my clutch with a heavy duty button clutch. NOT fun to drive everyday and it lasted at least 40k but same problem is happening to me right now. So I'll have to take mine in and I'm planning on getting a standard clutch

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-5880059
Share on other sites

Same as everyone else my clutch slipped in 2nd whilst trying to overtake a truck. Scared the pants off me. Burnt clutch smell took a week to go away after I had an exedy HD clutch put in. I regret going HD... daily driving it was too heavy in stop start traffic.

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-5880287
Share on other sites

easy.... put it in 5th at about 50kmh, put your foot down and you'll soon see if its slipping.

yep does it in 3rd... :(

Same as everyone else my clutch slipped in 2nd whilst trying to overtake a truck. Scared the pants off me. Burnt clutch smell took a week to go away after I had an exedy HD clutch put in. I regret going HD... daily driving it was too heavy in stop start traffic.

SAME!

Link to comment
https://www.sau.com.au/forums/topic/156719-clutch-slipping/#findComment-5881093
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...