Jump to content
SAU Community

Recommended Posts

it is. the dealer one you can tell is dealer fitted. the V35 will be factory fitted like the M35.

I have a fellow wanted me to rework a cima (it runs the Xenavi DVD/nav.) but I need a base to start from.

the unit that you list is used in the M35 as a factory fit (I have one here.)

it is. the dealer one you can tell is dealer fitted. the V35 will be factory fitted like the M35.

I have a fellow wanted me to rework a cima (it runs the Xenavi DVD/nav.) but I need a base to start from.

the unit that you list is used in the M35 as a factory fit (I have one here.)

Chris

Have you had any luck remapping the TV tuner to pick up Aussie Channels? I can pick up sound on Channel 7 but video is just off range. I understand you are gonna have a crack at it.

Paul

  • 2 weeks later...

I don't think it will be as simple as remapping the TV tuner.

For start Japan uses 60 Hz NTSC system where Aussie channels are 50 Hz PAL. You will need to convert the video signal back to NTSC if you want to use the original screen which is easy to do if the screen can handle 50 Hz signal.

Second problem is the sound. Sound is in different location in PAL system compare to NTSC system that’s why the tuner with IF amp are having trouble to lock on the stations.

If anyone has any ideas and is willing to work on this project let me know.

Tom

I looked at the idea. the OE xenavi item has two CAN controllers in it and a CPU with code on it. my thought originally was to hard code the tuner IC if it had one- it didn't- and swap the main tuner module out as they are somewhat standard. I stopped when I saw the CPU.

was aware of the format/IF 'differences'. V sync is slightly out as well 15735hz vs 15750hz.

wouldn't mind talking to you (PM me.)

Edited by Chris Rogers

I also though about swapping the tuner module but it's controlled by that Hitachi H8/3640 MCU using I2C protocol. Getting compatible PAL tuner would be very difficult. I've pulled the tuner module apart and I'm going to try some different crystals and SAW filters. I'm still waiting for my PAL to NTSC converter though.

Tom

I also though about swapping the tuner module but it's controlled by that Hitachi H8/3640 MCU using I2C protocol. Getting compatible PAL tuner would be very difficult. I've pulled the tuner module apart and I'm going to try some different crystals and SAW filters. I'm still waiting for my PAL to NTSC converter though.

Tom

part of the reason I stopped looking at it. if you manage to get the firmware out of it without destroying the chip I'd be interested. if the MPU controls the tuning voltage then your idea may work. I would still be looking at the tuner swap myself. (think VCRs :) ) we really need to talk when time permits :blush:

cant you use a pal to NTSC converter like people do with soarer in built TVs?

soarer is a bit different. this one IF you can get the signal inthe right spot - maybe. I'm doing it

another way.

Hey Guys,

Has anyone looked into the below option?

It's an SD card based Nav pc from VDO, and they seem to think that it should be able to be wired into the standard screen in the V35.

http://www.siemensvdo.com.au/press/release..._navigation.htm

I've done a bit of a search and it seems to come with a few screen options, but if this could be purchased seperately without the screen, would it be a massive task to wire it up to a OEM screen in the V35's?

Cheers

Wiring in another Nav system shouldn't be a problem. The easiest way would be to use RGB connection if the Nav system has one but the OEM screen has both, RGB and composite video connections.

The biggest disadvantage of that option for me is that you can’t use the original controls any more. The same goes for the stock TV, it’s easy to replace it but then you need to use another remote to actually control it.

There are 2 Discs that make up the software - 1 Program disc/Firmware update disc(CD) and 1 Map Disc(Dual Layer DVD)

The US guys say they can change the languages from their menus.

I've had the US discs sent to me(they are made by a different company - http://www.zenrin.com)

The Update Disc complains about firmware being incorrect. The Map DVD does nothing. So don't bother with this route guys.

But I'm pretty sure you would be able to exchange the DVD-ROM Drive with the US one and have it work. Harnesses "should" all be the same. The ones for the stereo certainly are. But i'm not going to fork out this money without someone confirming this firstly. Oh and if it works your screen will say Infiniti instead of Nissan...

I am really interested in getting the Jap equivalent to these Discs. I didn't get them, if you have them, can I beg you for a copy.

The best thing to do is get someone who speaks Japanese call up this company and ask them about an update copy of the firmware - can they confirm if it changes languages? That alone would be worth a shell-in for us to buy a copy.

Still interested in these discs. If anyone has them can you please PM me.

has anyone been to an australian nissan dealership to get some advice?

i was thinking of rocking up to a local Mr Nissan service department and explaining the situation etc

even if they can jsut convert the stock display from jap to english i would be happy with that..

there's no reason they can't pull out the control box, send it to japan to be converted, and then send it back and re-install it

that way we could get all the fuel economy stuff etc. in english

it all comes down to what they would charge for it, really.. i think i would pay a few hundred for that

yeah i'm ok with that, i was planning on connecting up an external nav device anyway (Actually chris, i might contact you in the near future about that if you can help me out as i'm in brisbane)

all i wanted to do with the stock setup is to get it in english, which they can apparently do in japan... no the nav, just the information screens such as fuel economy etc

yeah i'm ok with that, i was planning on connecting up an external nav device anyway (Actually chris, i might contact you in the near future about that if you can help me out as i'm in brisbane)

all i wanted to do with the stock setup is to get it in english, which they can apparently do in japan... no the nav, just the information screens such as fuel economy etc

You can get it in English I have already written to the company that makes them and they say the english version if for dealer installed nav systems only. The only possible way around it is using a US (Infinity) system but they rarely have the same systems as we do.

It is pretty much time to give up on converting the unit to english or local TV in any shape or form. The best you will do is retain the screen and install a after market VDO or Blaupunkt nav system. Or if you are after Movies only a DVD palyer and use the inputs on the tv tuner to port it in.

has anyone been to an australian nissan dealership to get some advice?

i was thinking of rocking up to a local Mr Nissan service department and explaining the situation etc

even if they can jsut convert the stock display from jap to english i would be happy with that..

there's no reason they can't pull out the control box, send it to japan to be converted, and then send it back and re-install it

that way we could get all the fuel economy stuff etc. in english

it all comes down to what they would charge for it, really.. i think i would pay a few hundred for that

I called them both on Dealership and Parts Dep of Nissan AUS, They said that, ALL the Nissan Model in AUS using VDO system, our 350GT using XNAVI system. So there is nothing they can do and there is nothing they know.

Ok listen up everyone,

If you want your Sat Nav or DVD or TV changed to australian standards visit jap link motors on parramatta rd, near leichhardt. The guy i spoke to there was Con. he can do anything for you with australian maps and no mods to the A/C buttons. Everything remains in its position. He can do the Sat nav for $1800.

Another thing, we have to organise a get together for all the V35's in Sydney. I haven't seen many around but have notice that there are at least 60 for sale in NSW. Hopefully soon we can get a bigger group.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...