Jump to content
SAU Community

Recommended Posts

Have just put a blowoff valve on my R33. Its an atmospheric one (not too loud thank christ) but now everytime i pull up at lights etc, it stalls. Why does it do this and how do i fix it???

Please help or the BOV has to go!!!

Link to comment
https://www.sau.com.au/forums/topic/162982-help-with-blowoff-valve/
Share on other sites

hey Brad,

this is a known common problem for atmo bov. I have a similar issue with my hks ssqv bov, i found that the return line that goes to the pipe that connects the afm to the turbo was leaking, so everytime i stop it would stall or almost stall. make sure that the return line is block and not leaking. Also does ur bov have any adjustment? as sometimes it can be too loses

Its because your running an AFM. The BOV is venting air thats already been measured so your car is running excessively rich and stalling.

Only way to solve it is to get a MAP based ECU or plumb that sucker back.

negative >_<

im running atmo bov with afm and it works fine :(

i've had 3 different bov with stock ecu no problem...

got a hks ssqv in mine haven't had really any stallin problems if ur driving a manual just change gears faster:P although ma bro in law has a ssqv on his 33 n he said he's had problems when he's like driving 70 it would even stall then

btw wot type is it? as if u have a ssqv they make recirculation kits for them to turn them into plumback:)

Hey mate just pop into Clark rubber and get a rubber chair stopper to block off your return pipe, works like a charm as suggested by someone on the forum. No stalling problem with my hks ssqv only bad thing is petrol has gone down hill haha so stockie might go back on soon when I can be bothered.

Try wind the idle up a little bit, like has been mentioned it's a very common problem with atmo's. The stock ECU is tuned to see the return air and I also think the stock BOV is designed to leak slightly at idle. Most people just wind the idle up to like 1000rpm and it's fine, some people just have non stop problems with them. My car never stalled with the R2D2 but it idles at 900-1000rpm.

My car's a manual. The blow off valve is some cheap chinese copy (yeah i know, serves me right) lol

Will be getting something better like a GFB or TurboSmart etc.

To cut a long story short, the best way to solve the problem is to have a plumb back?

However plumb back does not make the woosh noise?

Its not my idea by the way, my wife wants it to make the noise lol if it is going to cause problems, or premature turbo wear etc ill probably put the stock one back on.

when you install an atmo valve, make sure the return valve is sealed up, and if it's stalling when coming down to idle, try and adjust the valve a bit tighter... that way it will close sooner and it should hopefully fix your problem.

However, if you are giving it crap, you may experience backfiring on gearchanges etc as the car will run rich every time the BOV vents.

It already backfires and pops on hard, high rev gear changes lol

Is there a way to stop it running rich? Running it rich wont kill the engine will it?

While these questions seem dumb, i have never played with skyline engines. I know them very well underneath (Suspension etc) but never done anything under the bonnet lol

mmm ive had a problem like this

the return pipe to the intake pipe has to be blocked off

if the cars still stalling afterwards the revs are to low on idle so you gotta adj it on the back of the plenum which there is a screw

once the idle revs are fixed and car still stalls

your blow off valve spring is shit

and for running rich who cares its fine atleast its not lean and pinging

mmm ive had a problem like this

the return pipe to the intake pipe has to be blocked off

if the cars still stalling afterwards the revs are to low on idle so you gotta adj it on the back of the plenum which there is a screw

once the idle revs are fixed and car still stalls

your blow off valve spring is shit

and for running rich who cares its fine atleast its not lean and pinging

yeah some bov just dont work lol :pirate:

mate some people have no idea what they are talking about i have an auto skyline first mod ever done on it was an atmo bov (not anymore now plumback) but when i did have it, i bought a turbo smart one which comes with the plug to block the plum back pipe, never had a single problem with it at all... still had stock air box too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...