Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Been good reading guys, thanks.

If i hit 250 with a nice fat curve thru the middle, I'll be pretty damn happy :)

Just so you know, it'll be :

Z32

s15 injectors, 450cc

Tomei Fuel Pump

Power FC

FMIC

Zorst/Pod

I'll post it up soon enough....

  • 3 weeks later...

So the GTRS is the GT2535?... Is this the most popular street turbo for the rb25det, How much is it?

I have a:

Apexi power FC

E-boost

Apexi turbo timer

3" exhaust from turbo back

Front mount intercooler with custom piping

Custom cold air intake

Custom intake plenum

80mm throttle body

post-28112-1179133304_thumb.jpg

Im getting injectors the same time as the turbo as they are maxed out now.

Will i need the Z32 afm or will it be ok?

Would it be wise to get an aftermarket exhaust manifold? if so top mount or low mount?

Will the set up i have reach around the 250kw atw.

Thanks mate much appreciated. Slowly getting there.

Does the GTRS have a T3 flange? I was doing some searching on horsepowerinabox and from what i can figure they reckon the GTRS is for the sr20det's and the GT3076 would be better for the rb25det's?

The GT3037/3076 is an exceptional turbo for its HP range. It features a .6 surge slotted comp cover and a complimenting turbine/comp wheel ratio, making it a great bolt on upgrade for the 2-3 litre range engine.

This unit has a lot of flexibility in offered houisings. It can be supplied with a T25 .86 internal housing, a T3 .63 or .82 external gate housing and a recent edition is the option of internal gate T3 in .63 or .82 (these units are more expensive and subject to availability at the time). Usual ultra reliability and superb response from the Garrett ball bearing design.

Great upgrade for RB20/25s and other 2.5-3 litre's looking for some serious power.

So the GTRS is the GT2535?... Is this the most popular street turbo for the rb25det, How much is it?

I have a:

Apexi power FC

E-boost

Apexi turbo timer

3" exhaust from turbo back

Front mount intercooler with custom piping

Custom cold air intake

Custom intake plenum

80mm throttle body

post-28112-1179133304_thumb.jpg

Im getting injectors the same time as the turbo as they are maxed out now.

Will i need the Z32 afm or will it be ok?

Would it be wise to get an aftermarket exhaust manifold? if so top mount or low mount?

Will the set up i have reach around the 250kw atw.

The GTRS is NOT the GT2535. But due to the very similar power delivery, HKS dropped the GT2535 once the GTRS was released.

Are you claiming to have 250rwkw with those mods, on the std turbo? If so go to another tunner, as he is pullin' your chain :P

On the other hand; Very neat and clean engine bay, looks awesome :)

The GTRS is rated at approx. 380hp

The GT3076 is rated at 500hp

Two totally different turbos with different power curves. The GT3076 is also a great turbo, but will be laggier than a GTRS, on an rb25. In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine.

Oh, and why are you gettin ganother one?

Wouldn't you just rebuild the one you have? or is that what you mean?

I lost my dyno (it was 339hp but whos counting), but supporting mods were

FMIC

Fuel Pump

S-AFC-II

Split dump, 3.5" front pipe, 3.5" de-cat, 3.5" exhaust

16psi on EBC

I sold that one, i got pissed off with spending $$ on car, but now i got the bug again and bought a trusted/renowned great turbo :D

That said, I'll have this new one installed soon so I can post a dyno then :)

The GTRS is NOT the GT2535. But due to the very similar power delivery, HKS dropped the GT2535 once the GTRS was released.

Are you claiming to have 250rwkw with those mods, on the std turbo? If so go to another tunner, as he is pullin' your chain :)

On the other hand; Very neat and clean engine bay, looks awesome :laugh:

The GTRS is rated at approx. 380hp

The GT3076 is rated at 500hp

Two totally different turbos with different power curves. The GT3076 is also a great turbo, but will be laggier than a GTRS, on an rb25. In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine.

he is asking once he gets the turbo and injectors done could he expect 250rkw out of the new set up.

Edited by fEkuaR

Nahh i got around 200rwkw now but i ment when i get the mods will i have around 250 like fEkuaR said.

Al

"In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine."

So what are u doing with your GTRS? selling :laugh:

post-28112-1179220218_thumb.jpg

The GTRS is a fair bit more powerful than the GT2535 hey.

Do they both spool up in roughly the same time?

Also can u get the GTRS externally gated as apose to internally? http://www.slidingperformance.com/catalog/...products_id=312

Pro's and con's?..........

There is a fair bit of info about the GTRS if you look around.

the best description I've heard is 'It has the response of a HKS2530 with the top end power of a HKS2540'

HKS2530 - supposed ot have ripper spool up as it;s quite small so you can't argue with that, but the top end, boost would drop off off as it choked and can't cope or whatever.

HKS2540 - Ripper top end but an absolute dog for lag etc.....only suitable for drags...

So combine the 2 and you have the GTRS

So, can we now keep this thread to be HKS2535 oriented?

Thanks peeps....

Nahh i got around 200rwkw now but i ment when i get the mods will i have around 250 like fEkuaR said.

Al

"In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine."

So what are u doing with your GTRS? selling :sleep:

Sorry, my bad.

Am selling, but already have 2 potential buyers.

Since the turbo is less than 5,000 km old, i do not intend to give it away :P

  • 4 months later...

HKS 2535 is now tuned up to my satisfaction and it's a wee rippa.

Made 245.9rwkws on The Hitman's dyno which i don't think is a happy-reading dyno.

See the results in the dyno thread.

Spools up nicely and sounds great.

Vote 1 for HKS2535

And another vote for the s15 injectors which have done the job easily with more room to move(currently hitting about 80%)

I'm now guessing these babies are good for 270-280 rwkws.

That's it, anymore mods will be more along the lines of sell and by a Mitsubishi Mirage...tehe (seriously)

But I'm going to enjoy this one for awhile yet

Cheers guys :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...