Jump to content
SAU Community

Recommended Posts

Well the Inevitable has Finally happened.. On a leisurly drive home from work the other day, I spot a SS marked Cop Car just at the corner of burwood hwy and Springvale Rd.

I proceed to head down burwood hwy. I notice a 300zx pulling away from the coppa. Anyhoo I had this gut feeling that this cop was gonna get me, So i act on my instinct and try hide in traffic, to no avial... and lo and behold 2 seconds later he is up my ass with his lights flashing. I pull over in the side street, he gets out, gives me usual spiel, licenence etc etc. then asks me to pop the hood.

I proceed to do so, the officer goes striaght for the turbo. and starts questioning me on it. I start acting dumb and pretend i dont know much about cars. (prolly not a smart idea). I told him that all i know is the car is pretty much stock apart from a few minor mods. and the Turbo is standard(which it is), and that it may have been high flowed.

He also told me that I cant have "Both" a Aftermarket intercooler and a Air filter, I can only have one, and i should put the standard airbox back on, and according to him, he thinks my car would run more effieciently with no aftermarket air fiiter?.

Apart from that he didnt care about anything else, as he didnt bother looking at anything else, he was actually a pretty good bloke. he said he "had to" notify the EPA, who i am yet to recieve a letter from.

So.. whats gonna happen and how much is this ordeal gonna cost?

what else is gonna implicate me at the EPA??

note :

i have a 4" exhaust

Hks BOV. kinda loud, but not excessive.

will they pin me for the HKS evc? or the Turbo Timer?

am i totally f*ked?

cheers!

:rant:

Link to comment
https://www.sau.com.au/forums/topic/168044-what-am-i-in-for/
Share on other sites

am i totally f*ked?

Yes.

Bend over and receive your glory!

:thumbsup:

When you get the letter just change the airbox and exhaust back to stock before you take it in....and im not sure, but externally you cant tell that if a turbo has been hiflowed yer? Say its stock. As for the BOV, i think you need a plumb back one -i think.

jaimzr33 - A boxed pod it not legal guys, it never has been and never will be.

hmmm, well i took the car to an engineer and he said it would pass an engineers report provided i had a noise/emission test done at epa. i realise this topic has probably been done to death, but i'm still confused :thumbsup:

Well yeah he is right... a pod filer un-enclosed is not as good as a airbox/panel filter :(

That said, your probably off to the EPA.

Saying it was hi-flowed is a silly thing to do.

EBC - need to be removed

Exhaust - need to be quieter. 4" wont be legal.

BOV - need to be removed.

The stock BOV is the best item, so changing over isnt a bad idea to begin with.

Same with airbox

how come you told him u had your turbo highflowed?

and he "had to" notify EPA cause thats what they r told to do

Rule 1 Don't volunteer anything.

Rule 2: See Rule 1.

Cops always (or almost always)

1: Try & pretend that they are either doing you a favour (I could have booked you for blah, but I will only do you for blah blah...) or

2: "They are only doing their jobs".

Both these approaches are rubbish because

1: They don't actually have to book you for anything if they don't want to.

2: Unemployment is at historic lows - which means they can get a real job.

Anyway, take the pain that is coming to you & resolve to keep the car legal. That way you wont have to go through all this rubbish a second (or third, or fourth) time.

Read the fist post and you'll see I was referring to that. Thanks.

There was no mention of a boxed pod in the "fist" post.

The officer suggested to return the air filter to stock.

However, jaimzr33 asked about a boxed pod, and was given misleading info.

A boxed pod is perfectly legal. :P

sorry to hijack your thread gazza. but i still really haven't got a definitive answer. if i had an aftermarket intercooler and boxed in pod, that would still count as 2 intake mods yeah? and wouldn't having those mods engineered override epa? i tried looking on rta website but my gay internerd keeps crashing everytime i try to pull up the links to website. i live in sydney - so i don't know if these rules differ from state to state. could someone pretty please copy and paste/post info onto this thread. i would be eternally grateful. as i would hate to end up in the same situation as gazza

the law broken is exceeding more than 1 intake modification.

FMIC + AIRPOD = 2 intake modifications

A box around the pod is still a modification (as its not stock) and hence still are breaking the 1 intake mod law.

A box around the pod with NO intercooler is legal as it equals 1 intake mod.

Not sure if my input helped :domokun:

Thanks for the help guys, Now.. I need to source a standard exhaust, Air box and BOV. Anyone willing to help a man in need? i will buy you a few beers? or shout you a night at french satin haha.. joking. How much would it roughly cost to get the exhaust removed and fitted with the standard one + the BOV, i could do it myself but got no stands. Also how the Hell am i gonna remove the EVC?? the controller itself is stashed in a concealed mini glove box thingy next to the steering wheel, and the LCD display is mounted on the otherside of the steering column, does the LCD unit need to go to?? and what should i do about the Turbo timer that sits next to the hand brake. what should i do about that?

any help would b much appreciated.

Edited by Gazzilla

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...