Jump to content
SAU Community

Recommended Posts

Well the Inevitable has Finally happened.. On a leisurly drive home from work the other day, I spot a SS marked Cop Car just at the corner of burwood hwy and Springvale Rd.

I proceed to head down burwood hwy. I notice a 300zx pulling away from the coppa. Anyhoo I had this gut feeling that this cop was gonna get me, So i act on my instinct and try hide in traffic, to no avial... and lo and behold 2 seconds later he is up my ass with his lights flashing. I pull over in the side street, he gets out, gives me usual spiel, licenence etc etc. then asks me to pop the hood.

I proceed to do so, the officer goes striaght for the turbo. and starts questioning me on it. I start acting dumb and pretend i dont know much about cars. (prolly not a smart idea). I told him that all i know is the car is pretty much stock apart from a few minor mods. and the Turbo is standard(which it is), and that it may have been high flowed.

He also told me that I cant have "Both" a Aftermarket intercooler and a Air filter, I can only have one, and i should put the standard airbox back on, and according to him, he thinks my car would run more effieciently with no aftermarket air fiiter?.

Apart from that he didnt care about anything else, as he didnt bother looking at anything else, he was actually a pretty good bloke. he said he "had to" notify the EPA, who i am yet to recieve a letter from.

So.. whats gonna happen and how much is this ordeal gonna cost?

what else is gonna implicate me at the EPA??

note :

i have a 4" exhaust

Hks BOV. kinda loud, but not excessive.

will they pin me for the HKS evc? or the Turbo Timer?

am i totally f*ked?

cheers!

:rant:

Link to comment
https://www.sau.com.au/forums/topic/168044-what-am-i-in-for/
Share on other sites

am i totally f*ked?

Yes.

Bend over and receive your glory!

:thumbsup:

When you get the letter just change the airbox and exhaust back to stock before you take it in....and im not sure, but externally you cant tell that if a turbo has been hiflowed yer? Say its stock. As for the BOV, i think you need a plumb back one -i think.

jaimzr33 - A boxed pod it not legal guys, it never has been and never will be.

hmmm, well i took the car to an engineer and he said it would pass an engineers report provided i had a noise/emission test done at epa. i realise this topic has probably been done to death, but i'm still confused :thumbsup:

Well yeah he is right... a pod filer un-enclosed is not as good as a airbox/panel filter :(

That said, your probably off to the EPA.

Saying it was hi-flowed is a silly thing to do.

EBC - need to be removed

Exhaust - need to be quieter. 4" wont be legal.

BOV - need to be removed.

The stock BOV is the best item, so changing over isnt a bad idea to begin with.

Same with airbox

how come you told him u had your turbo highflowed?

and he "had to" notify EPA cause thats what they r told to do

Rule 1 Don't volunteer anything.

Rule 2: See Rule 1.

Cops always (or almost always)

1: Try & pretend that they are either doing you a favour (I could have booked you for blah, but I will only do you for blah blah...) or

2: "They are only doing their jobs".

Both these approaches are rubbish because

1: They don't actually have to book you for anything if they don't want to.

2: Unemployment is at historic lows - which means they can get a real job.

Anyway, take the pain that is coming to you & resolve to keep the car legal. That way you wont have to go through all this rubbish a second (or third, or fourth) time.

Read the fist post and you'll see I was referring to that. Thanks.

There was no mention of a boxed pod in the "fist" post.

The officer suggested to return the air filter to stock.

However, jaimzr33 asked about a boxed pod, and was given misleading info.

A boxed pod is perfectly legal. :P

sorry to hijack your thread gazza. but i still really haven't got a definitive answer. if i had an aftermarket intercooler and boxed in pod, that would still count as 2 intake mods yeah? and wouldn't having those mods engineered override epa? i tried looking on rta website but my gay internerd keeps crashing everytime i try to pull up the links to website. i live in sydney - so i don't know if these rules differ from state to state. could someone pretty please copy and paste/post info onto this thread. i would be eternally grateful. as i would hate to end up in the same situation as gazza

the law broken is exceeding more than 1 intake modification.

FMIC + AIRPOD = 2 intake modifications

A box around the pod is still a modification (as its not stock) and hence still are breaking the 1 intake mod law.

A box around the pod with NO intercooler is legal as it equals 1 intake mod.

Not sure if my input helped :domokun:

Thanks for the help guys, Now.. I need to source a standard exhaust, Air box and BOV. Anyone willing to help a man in need? i will buy you a few beers? or shout you a night at french satin haha.. joking. How much would it roughly cost to get the exhaust removed and fitted with the standard one + the BOV, i could do it myself but got no stands. Also how the Hell am i gonna remove the EVC?? the controller itself is stashed in a concealed mini glove box thingy next to the steering wheel, and the LCD display is mounted on the otherside of the steering column, does the LCD unit need to go to?? and what should i do about the Turbo timer that sits next to the hand brake. what should i do about that?

any help would b much appreciated.

Edited by Gazzilla

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...