Jump to content
SAU Community

Recommended Posts

HELLO SKYLINE FREAKS

AFTER READING LOTS AND LOTS OF POSTS OVER A YEAR OR SO I HAVE FINALLY TAKEN MY 1995 R33 TO THE ENGINE DOCTORS ,WITH ALL OF MY PARTS I HAVE COLLECTED OVER THE LAST 6 MONTHS I'm HOPING TO GET A GOOD OUT COME FOR MY $$$$$$$$, MY CAR SHOULD BE READY IN ABOUT 2-3 WEEKS , HERE'S A LITTLE LIST OF THINGS.

Nismo thermostate

Nismo high flow fuel pump

Nismo strong release fork pivot

Nismo engine mounts

Nismo gear box mounts

Nismo 550cc injectors

Nismo flywheel

Nismo gearstick & handbrake boots

Short shift kit

Excedy custom clutch

Eagle conrods

ARP head studs

Arias pistons & rings

Acl engine bearings

Custom Radiator 40mm

splitfires coil packs

Sard sports magnetic oil filters (2)

Sard magnetic oil pan plug

Sard annodised aluminium cooling oil block

Sard fuel regulator adaptor

Sard fuel regulator

Nissan N1 oil pump

Nissan water pump

Apex power FC

Greddy remote switching system

Greddy boost controller

Greddy oil catch can

Greddy blow off valve

Greddy intake plenum

Greddy intake plenum throttle adaptor

Fujitsubo exhaust

Catco stainless high flow cat converter

3" dump pipe

Front mount intercooler

Custom turbo intake pipe

Custom air box

Radiator air guide

HKS valve springs

HKS gauges - oil temp, oil press, exhaust temp

HKS oil cap

HKS cam shafts 256-intake

HKS cam shafts 264-exhaust

HKS turbo kit GTRS

HKS wiring harness for Z32 AFM

Bosch Z32 air flow meter

Tomei hicas lock

Gates timing belt

Billion radiator cap

Billion super solid coolant line

new Kakimoto muffler done months later

new cold air ducting

new air box

new induction pipe

RDA front disc rotors

Green stuff pads - front & rear

Nissan rear strut brace

KYB shocks

Pedders springs

Front strut brace

Mondeo two's two pce racing rims 17x8.5" 17x9.5"

I HOPE I GET SOME NICE KW OUT OF HER .

ALSO A BIG THANKS FOR EVERYONES POSTS OVER THE PAST YEAR IVE READ SOME GREAT STUFF AND SOME S...... :)

post-26570-1181776153_thumb.jpg

post-26570-1181776402_thumb.jpg

post-26570-1181777192_thumb.jpg

post-26570-1181777239_thumb.jpg

Edited by WARLORD
Link to comment
https://www.sau.com.au/forums/topic/172704-money-money-money/
Share on other sites

  • Replies 539
  • Created
  • Last Reply

Top Posters In This Topic

Dude!

I think i would have gone a bit mental having that many parts sitting at home and not fitted to the car.

I hope right before you started collecting you invested in a nice new house alarm.

IT KILLED ME LOOKING AT THEM AND NOW ITS KILLING ME THAT I HAVE TO WAIT 3 WEEKS ..IVE BEEN RUNNING AROUND FROM SPRAY PAINTER TO AIR BRUSH CLOWNS AND I CAN'T WAIT TO JUST FINISH ,MY WIFE HAS BEEN COOL ABOUT IT BUT I NEED TO FINISH SOON BEFORE BABY COMES OUT AND MONEY GOES WITH IT..HAHAHAHAH

Edited by WARLORD

are you having them install all the bits you bought? i would've been installing things like the fuel pump myself to save time and money. but should be pretty good once you get it back.

i do think there may have been a few things that you could've gone without though. they just add to the wank factor of it. things like the hks oil cap. but each to their own.

are you having them install all the bits you bought? i would've been installing things like the fuel pump myself to save time and money. but should be pretty good once you get it back.

i do think there may have been a few things that you could've gone without though. they just add to the wank factor of it. things like the hks oil cap. but each to their own.

ALWAYS ONE OUT THERE ,MAYBE I SHOULD OF GOT A FAKE, WOULD OF THAT DROPPED THE (WANK FACTOR) OR MAYBE MONEY IS MORE THE PROBLEM HERE ,AND THE LACK OF IT FOR SOME

WHAT A LOVELY GREETING...... YOU WOULD THINK LIKE MOST PEOPLE WOULD BE HAPPY FOR YOU, OR SAY SOMETHING NICE, BUT NO.... THERES ALWAYS ONE ALWAYS!!!!!

BUT THANKS FOR YOUR COMMENT

WET CAT

post-26570-1181781579_thumb.jpg

Edited by WARLORD

caps locks is annoying to read.. so please type normally!! thank you

As for the list, i would have done it in stages, and not just one big go. That way i can learn/use the new part.

But eitherway, gdluck with your car.. She will have some nice goodies!!

caps locks is annoying to read.. so please type normally!! thank you

As for the list, i would have done it in stages, and not just one big go. That way i can learn/use the new part.

But eitherway, gdluck with your car.. She will have some nice goodies!!

Thanks for your kind words,o and i'll type normal from now on,sorry

Would anyone else like to take a shot at me ? It seems to be the in thing today...LOL

post-26570-1181784033_thumb.jpg

Edited by WARLORD
  • Like 1
we tend to get 13 year olds who pretend they have awesome cars come on here, and talk shit. You probably would have seen a few of them if you've been around for a year.

i have read tons of crap over 500+ posts that ive read, and to tell you the truth it makes it fun to figure out who's full of poo and who's not... But let me tell you, in 3 weeks time I hope, I will be posting my dyno sheet on the website and hopefully july the 1st Ive got a private drag day with australia muscle car forum. As a lot of my mates have the old muscle car dinosaurs running 10 & 11's.......and I want to give them a go, Or at least try.

I am way past 13...here's a puzzle for you, Im double that plus half, then minus one..hahahahahaha No 13 year olds should figure that out these days..

Well mate you sound like a flipping loony but thats a huge list of mods for your car and I wish you luck with it, I look forward to seing the dyno sheet. Just go easy when you first get her back, just a huge change at once it will literally be like driving an entirely different car with completely different handling characteristics.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...