Jump to content
SAU Community

Recommended Posts

didnt the M3's do 13's?

or was that the later/current models?

Early Ls1's such as VT - VY were like low 14s and I think the series 2 VY onwards in motor finally nailed a 13.9

Thats the LS1's though...

LS2's high 13's from factory

Being an Ex LS1 owner Id rather an M3 :D

The E36 M3 wasn't very fast. 6.0sec 0-60mph and 14.6sec 1/4 mile time. Wasn't until the next generation that the M3 became a rocket. I have no idea what the SS runs in the 1/4, but I have driven the E36 M3 and its nothing to write home about. Only a shade faster than the Viggen and cost $10k more, but thats a different argument entirely. Anyways, look up the 1/4 mile numbers on the Commodore and if its faster than 14.6sec it will beat the M3.

Side note - The M3 would whoop the Commodores ass around a proper track though.

Edited by Rabid

it all depends on what model ls1 it is.

if it was a vt or vx i'd say the m3. later models it would be close. with a good set of tyres a m3 would beat a lot of reasonably stock r33's. i saw one put down 233hp (173kw) at the wheels at a dyno day. it was stock. some old rich guy just wanted to put it on to see what it would get.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just as a thought, if it's in neutral, thats your drive line disconnect, not the clutch. Clutch slip at the dyno with pedal fully out, is actually adding a second disconnect. So it's not a clutch issue if you're in neutral. Just a bit of friction dragging the output around while in the air.
    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
×
×
  • Create New...