Jump to content
SAU Community

Recommended Posts

Hi there i am trying to remove the oil filter from my RB25DET, i have a Greddy plenum so its a bit harder to get to than before. I broke a oil filter remover, twisted and warped the handle completely. Tried the ol screwdriver through the filter, doesn't turn the filter just rips up the metal.

Now it is stuffed beyond anthing, the front half of the filter is mangled. Im thinking i might have to hacksaw it off, just wondered of anyone had any ideas before i do that, cause its really hard to get to.

Theres a oil filter remover that I use on mine that suits it no problems. It looks like a pair of multigrips and the jaws are curved to go around the oil filter. This one works best on the r33s as Ive got about 5 different oil filter removers.

this is my trick, call it gay if you want lol.,. get one of those dentist rubber gloves. jus put it over the oilfilter try taking it off again by hand. you got way more grip.

Haha, I use the same trick, works well.

he said he used (and broke) an oil filter remover in teh first post. Why was it on so damn tight?

LOL, i got one of those seatbelt strap removers, the filter doesn't move it just crushes. Tried smacking a screwdriver on the rim of the filter, just cuts a biger hole, doesn't budge the filter.

NEXT STEP, i removed all the paper shit from the inside of the filter and tore the whole thing apart, now i can see the front face of the filter, taking a dremel to it tonight, i have no idea WTF they did with the filter, i have replaced the filter at least 5 times before, never this much trouble.

I don't think you can undo it by hand anymore. When you punch a screw driver through the filter, it leaves sharp metal hanging out. I think your only option now is to hack the thing out or something.

I think your filter's gonna turn out like the pics above ^^^

I have never ever had this problem with an oil filter. I never destroy it by putting the sccrewdriver through it, because it just makes it hard to work with.

I've had some mega tight ones. the best tool is your hands. What I do, is I clean the filter off really well with brake cleaner, so ti's not slippery. I then use one of those sticky matts - the ones from the supermarket that you use when a jar is hard to open for weak mums. I use two hands on the filter. Never fails.

^^^^^^^^^^^^^^ im with you!

Rubber gloves normally do it

if not ive got a filter strap thing but its hard to get in there

if not get a mat thing

then if all else fails call my Hungarian mate... for a bit of WOG POWAH

seems to do the trick!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...