Jump to content
SAU Community

Recommended Posts

Its just the 40th aniversary edition. Only difference is the badges on the side of the car the seats have 40th aniversary embroided into them plus you have the option of a different front bar. Gearbox is the same.

plus optional GTR rear wing.. plus the usual options.. dual airbags.. hicas.. haven't seen one with an a-lsd.. also there are others including Momo steering wheel.. different gear knob.. "sports exhaust"..

I should print them all out of Nissan fast..

I bought a 40th anniversary and besides the badges it just came with a heap of extras like

factory keyless entry with alarm, factory Skyline floor mats, front lip and the car is

midnight purple. oh and has the light up skyline garnish thats under the boot lid which doesn't

actually work thanks to the previous owner. but thats all i can tell comparing it to my mates skyline

doesn't go any harder.

To add 1 more thing;

I have been told the S2 had a stiffer suspension option, With heavy duty springs.

I have driven a S2 with this apparent option, It was defently differant to the stock setup, Im unsure if it is factory optioned or aftermarket, But several importers have told me its an option.

Any one care to explain?

no cup holder for me

1997 feb series 2 with active lsd

also i think the coin holder thing on the right hand side

was an option on both series 1 and 2, mine doesnt have it

but have seen it on a series 1

I have a 40th anniversary R33 Skyline, some features include:

.Midnight purple

.No coin holder on the right hand side of the dash facia (S1 only I believe)

.Foldable wire cup holder

.GTR Wing

.GTR style front bar

Not necessarily a feature, but the 40th anniversary S2 R33 has a different crank angle sensor to normal S2 R33's....The same Hitachi unit as used by the R34. I wonder if any other engine components are shared?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...