Jump to content
SAU Community

Recommended Posts

its not the higher octane that leans the af's out but more so the 5% ethanol in v power racing. u have to run your car slightly richer when using ethanol but the bonus is u can run alot more timing hence make more power. this has been proven using 2 different fuels both 98ron however one was e10 and the other had no ethonol. the e10 ended up making 30kw more power after a re-tune on the same boost. so if u have the stock computer then definitely run V power racing it'll only make things better. however if u have had the af's changed i'd recomend getting them checked with the V power racing fuel to make sure they're safe.

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

yeah I no longer run stock computer. have a pfc tuned to around 12:1 afr so guess I should just stick to 98 for now.

If I do get the car tuned on 100 octane V Power Racing later on, would it hurt to run 98 octane (v power, ultimate) occasionaly in case V Power Racing is not available?

Edited by BaysideBlue
  • 2 weeks later...
getting car tuned on 100 n then go use 98 isnt advised.

WHat about Boost 98, E10 98RON?

Has ethanol content but 98RON. Does the car still need to be retuned in order to run it safely?

skylines are ment for 100 octane as that is standard octane in japan :thumbsup: so there already tuned for that

wait, is there a difference between standard 100 octane in japan and V power racing (100RON)?

I have been told our standard 98RON fuel is equivalent to 93 octane fuel in the U.S?

100 octane fuel is not 'standard fuel in japan'. Yes 100 octane (and in some places higher) is available but 99% of all japanese cars, including skylines etc are happy to run on 95 octane when standard. obviously when modified a better fuel is a smart choice.

bayside, the reason people would tell you that is the US use a different method of measuring the octane rating of their fuel.

Here is a link for a Motec test on V-Power Racing - there is a pdf that has detailed report on what they did and what figures the acheived - it even outperformed avgas when the engine is tuned correctly!

so if you tune your car right you can expect some good results from V-Power racing it seems

http://www.motec.com.au/fueltest/

Here is a link for a Motec test on V-Power Racing - there is a pdf that has detailed report on what they did and what figures the acheived - it even outperformed avgas when the engine is tuned correctly!

so if you tune your car right you can expect some good results from V-Power racing it seems

http://www.motec.com.au/fueltest/

Thanks. Great article!

Worth a retune to 100 octane it seems, a relative cheap way to get more power with the benefit of higher anti knock safety margin!

100 octane fuel is not 'standard fuel in japan'. Yes 100 octane (and in some places higher) is available but 99% of all japanese cars, including skylines etc are happy to run on 95 octane when standard. obviously when modified a better fuel is a smart choice.

bayside, the reason people would tell you that is the US use a different method of measuring the octane rating of their fuel.

Whats the deal with North America having 100 octane fuel (105RON equivalent) available in selected fuel stations while the best we have in Australia is "only" V power 100RON?

I don't know why they get higher rated fuel, but I guess they have a pretty good handle on controling the crude oil market...

I can get 102 on pump here in adelaide (4$ a letre tho)my 12.1 rally car needs that and avgas(110+) on pump here too(2,20$ a litre)but u need racing licence for that.I tried 102 in my skyline but nknew it would only be good for cleaning it out.nissan recomend 100 or at worse 98+

Edited by cosworth1971

Cheers BaysideBlue

Yeah it is basically free horespower without makeing any mods to your car, well no mods aside from tuning the car to suit - if you can get a few extra horsies just by pumping them into your tank rather than emptying your bank account and bolting stuff to your engine (and then having endless troubles when the mods you put on don't work and have to make more mods to get the original mod going right - c'mon someone here is nodding having been down that road like myself) than that is a good thing!

I filled up a tank of VPR and so far i do notice the difference - just waiting to see how many K's i get on the one tank - so far looking good

Edited by pinni74

I noticed jack all difference... Pretty stock r34 .. maybe slight power increase down low .. Noticed id be at redline faster but cant feel it much .. Cost me 1.51 a litre and did last longer but to get it is hard and for the cost its a rip..

If you want a power boost hit up caltex vortex :(

I noticed jack all difference... Pretty stock r34 .. maybe slight power increase down low .. Noticed id be at redline faster but cant feel it much .. Cost me 1.51 a litre and did last longer but to get it is hard and for the cost its a rip..

If you want a power boost hit up caltex vortex :P

Ah yes but bear in mind you need to advance the timing to get maximum benefit from VPR it will improve your performance - you car is tuned to run 95-98 not the 100RON - give another tank a bash and get your timing adjusted - if you get it all right you will see better performance on V-Power Racing. :(

Its been said bu using the ethonal based fuel will cause yor car to lean out, if modified and not tuned for the ethanol..

Mines tuned on BOOST98, the fuel is cheap and i got great results with it..I think the ethonal fuel was the basis on the surprising power output my car made (40rwkw more then I and everyone else expected and imagined)..

The benefit to using ethonal is the timing they can add into the car which = power.

mid range power yes but less timing u can go within reason is best for top end.depends what u want?

and no u wont feel massive power gains with 100 octane but maybe 1/3 second a lap if your timed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...