Jump to content
SAU Community

Recommended Posts

crd are pretty $$$ but look at what you get for it... i would never take my car to BEL after the last dyno night.

From memory, CRD charged around $200 for a full inspection on my old car for the new owner before I sold it, including dyno check and comprehensive chassis inspection which I think is very reasonable.

Considering what your about to pay when buying the car, the above is a small price to pay for peace of mind.

  • 7 months later...

So 7 months later I ended up putting a deposit on this today:

Click Here!

Expecting delivery in about a week, getting it inspected etc. Very excited/nervous. It has a very touchy clutch that i'm really not used to at all, but other than that the car is great.

3217886.jpg

3217985.jpg

look nice mate. just make sure you get it well checked out. there is a touch of fabrication in the ad. $6000 work emotion CR kai? lol. $700 apexi pods? double lol.

Yeah mate i'm not too phased by that stuff, as long as the engine, diffs, gearbox etc are all Mickey Mouse i'll be a happy camper. thinking about replacing the clutch with something a bit more user friendly as well, can't be arsed fighting with it constantly and I don't plan on launching it a lot either so there's not much benefit for me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...