Jump to content
SAU Community

Recommended Posts

Have done a few more bits and pieces to the car... the plan is PI on the 4th of April... *fingers crossed*

Making a template for the alloy boot false floor:

post-8405-1236208230_thumb.jpg

Finished floor

post-8405-1236208378_thumb.jpg

what sort of bracing is required to keep the rigidity when doing this?? is it riveted or glued in??

cheers

Linton

Well,

I didnt build it......just bought it!

Its just been engineered here in nsw (waiting for paper work) and is also a cams log booked car too.

*awaits hairdresser comments* :)

post-24539-1236377499_thumb.jpg

post-24539-1236377549_thumb.jpg

post-24539-1236377706_thumb.jpg

LOL @ mardi gras!!!!

It's a 94 clubman.

Motor is standard 1.8l, even standard exhaust and intake!!

Brakes are standard too, just has hawk pads, braided lines, master cylinder brace

Suspension has tein flex, whiteline front sway bar

6pt cage, sparco drivers seat, daytona passenger seat

Weighs just over 1000kg!

Racing it on Sunday at op gp!

Prev owner did a 1.27.3 on gp already!!

My plans,

Full exhaust, intake, rx7 calipers and that's it!!

I think it's going to be a great car to learn how to race properly in!! Can't wait!!!

Well,

I didnt build it......just bought it!

Its just been engineered here in nsw (waiting for paper work) and is also a cams log booked car too.

*awaits hairdresser comments* ;)

Hey dude, nice to meet you yesterday at Greg's.

I made it home safe. :banana: . Road car next to the track car.

Michael

DSC00940%20(Medium).JPG

Jay! Yeah but most likely next year? Will see how it goes! Although maybe see towards end of year?

Michael!!! Wow small world!!!! Glad to see you made it home safely mate!!! Garage looks great!!!

excellent choice chris. I looked at these pretty closely before deciding I needed to own only nissans.

You have plenty of options to race it too, a busy mx5 club, track days and production sports cars.

BTW It will go much quicker than 1.27 at OP on good tyres....you'll have good fun in it.

putting together a little evo 3 further to the rx7 at the moment, its a gsr not an rs hence the sound deadener

always wanted one of these classic shape evos since driving a mates around baskerville about ten years ago

need to finish it off for a mate to borrow to use at targa tasmania this year so its all systems go and should get it back from the cage fabricator in a week or so

using it to showcase some of benson motorsports specialst tarmac rally products soon to be launched and up until last weekend it was a bog stock road car

e2.jpg

Evoin.jpg

IMG00278.jpg

IMG00279.jpg

IMG00280.jpg

IMG00281.jpg

IMG00282.jpg

IMG00287.jpg

IMG00285.jpg

evocage.jpg

who's doing the cage stu?

We're pulling off the doors, and stripping the interior out of the new R33 this weekend ready to put the cage in next weekend. The Brakes and rear hubs should get here early next week.

Edited by sav man
who's doing the cage stu?

We're pulling off the doors, and stripping the interior out of the new R33 this weekend ready to put the cage in next weekend. The Brakes and rear hubs should get here early next week.

Ay???

Dad got a 2nd car to fix the Targa car, but he ended up getting cheap parts. So we're doing the 2nd car up as a twin to sell. The white car got a Fresh N1 engine, and the old N1 engine is being refeshed and put in the 2nd car.

darren elphinstone from up near burnie is doing it for me.

if you need a bonnet, skirts, boot, wing, gt2860r-7 turbos (top condition) or another N1 engine (low k, being refreshened right now) have got it all in stock!!

LOL @ mardi gras!!!!

It's a 94 clubman.

Motor is standard 1.8l, even standard exhaust and intake!!

Brakes are standard too, just has hawk pads, braided lines, master cylinder brace

Suspension has tein flex, whiteline front sway bar

6pt cage, sparco drivers seat, daytona passenger seat

Weighs just over 1000kg!

Racing it on Sunday at op gp!

Prev owner did a 1.27.3 on gp already!!

My plans,

Full exhaust, intake, rx7 calipers and that's it!!

I think it's going to be a great car to learn how to race properly in!! Can't wait!!!

You've just given yourself a very steep learning curve, but i think you'll end up a better driver for it. Ignoring my old braking points was (and still is) the hardest for me.

You missed 2 very important things in your list of bits. It has a nardi and work emotions. You already have drift cred :D

hahahah yes forgot about them! But I thought the nardi was standard on the clubmans?

Had it at OP GP today and did a 1.30.4 - 2 seconds slower than my r33...and 1st in class!

So Im happy, as my goal for first time out there was a 1.30!

There is alot to learn!

Braking points is the first....as you said! haha

I just cant believe the corner speed it has! Cant wait to get some more time in it and use the corner speed to go faster!

It is going to be a big learning curve, but thats what I want! get the lines and corners and braking points sorted, then go faster!

All in all, t'was a fun day of racing!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...