Jump to content
SAU Community

Recommended Posts

Just need a bit of advice and to see what you guys would do.

I have a GTST series 2 R33.

I was having trouble with the car showing high knock levels on my power fc around Jan this year. So i took it into boostworks and got it tuned. Cant remember what it cost off the top off my head.

It then kept knocking so a few months later i took it back in and they fiddeled around with it again and charged me $50.

Now the knock is gone but since the last tune up im now getting terriable fuel econmy. I was getting 400km to a tank, mayb a bit more. Now im struggling to get 350km... I dunno whether im now being to picky but im not to happy....

What would you do? Is that just the way it goes or what?

And i dont really want to keep annoying shawn....

Link to comment
https://www.sau.com.au/forums/topic/177184-boostworks/
Share on other sites

Adam, They may have needed to dump some fuel in to stop it from knocking, or at least to make it a little safer, either that or you may need a new 02 sensor! Mine goes thru the juice as well, I would assume you should get more than 350 out of a tank, but don't expect to get too much as these sorta cars come at an expense!

Link to comment
https://www.sau.com.au/forums/topic/177184-boostworks/#findComment-3237465
Share on other sites

heres an idea....ring shuan and ask him?

edit/ u should get around 10L/100km

Dunno about that... on the open road you will. In the city I average around 13L/100 and the worst I get is about 15L/100, and my car is still pretty standard.

My last fill was 11.5L/100 with about 300 km of it in the country.

Still I'm pretty happy with that as friends with Gen3 V8's are lucky to get 20L/100 :D

Link to comment
https://www.sau.com.au/forums/topic/177184-boostworks/#findComment-3237903
Share on other sites

3lt with mods and i get that with conservative driving easy. Not city centre or peak traffic, but everywhere else (all the time) i do.

how can u doubt what i get even though u dont know me or have seen my car....? Im the one who drives and fills the tank

If i booted it id probably suck more fuel than u, but id be gone from the servo before u got there :D

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/177184-boostworks/#findComment-3237941
Share on other sites

Going somewhere else isn't going to magically solve the problem. It looks like Shaun knew what he was doing and did solve the problem whilst charging almost nothing!

My suggestion is that he has FIXED the knock problem which may have been masking another problem that affects fuel economy.

Your engine was obviously running quite lean (hence the knocking), which will also give you more power and use less fuel (because running lean means you are using more air and less fuel than if it was running rich).

So all he has done is make your AFR's safe (like it should have been before), so rather than blaming that for your poor fuel economy, look for another problem elsewhere.

I'd go with the recommendation to check/change your O2 sensor, check tire pressures, ignition timing, Air filter (every little bit helps), intake temps and anything else you can think of that may affect fuel economy.

You should have an AFR graph from your last dyno which should help to see where the problem lies. A good looking AFR might still mean there are sensors not working 100% correctly.

Link to comment
https://www.sau.com.au/forums/topic/177184-boostworks/#findComment-3238506
Share on other sites

completely off topic but,

that red VL with boostworx hollographics all over it...is that owned by one of the guys who works there? Ive seen that thing punch it before and, wholly crap....

Nope he doesn't work there. It still hasn't been pushed hard yet as its had a few issues initially with oiling then the bottom end let go and now its running a std bottom end. Unsure when it will have another tough bottom end slipped in there and pushed up over its previous best of ~300rwkw. Its definitely got some potential.

-----------

Adz,

Throw some nulon fuel system cleaner through it (believe it or not it does work when used every 5-10,000km's or so), check the o2 sensor is swinging once the car is warm and your cruising at a steady speed, if its not check o2 feedback has been turned back on after tuning.

----

As with bl4ck32 I was getting from mid 10's to flat 11l/100km's when tuned up from the rb30det driving around with a bit of a lead foot as it loves to lunge off the line with very little throttle input.

BUT saying that our motors are essentially identical; same headwork by the same people at the same time, same bottom end at the same time same people etc etc.

Link to comment
https://www.sau.com.au/forums/topic/177184-boostworks/#findComment-3239095
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...