Jump to content
SAU Community

Recommended Posts

I'm sure some of you have heard about Project gtst here in the UK, Well I have recently just finished repainting the car for John, He decided to change her in to a fully tubbed Pro mod car for 2007, thought you guys would like a look :)

Came to me looking like this..

img0152oy6.jpg

img0154aa9.jpg

And work began,

New wing vents added..

img0157yg7.jpg

Insides of the carbon doors where coated in Mipa Gemini, a green/copper/gold flip transparent pearl and laqcuerd..

img0162rf7.jpg

The body was painted in a light blue pearl first then the detailing masked out..

picture001wl6.jpg

picture005ca8.jpg

Detailed ares where painted black, car de-masked and coated in more of the Mipa Gemini..

picture006lm4.jpg

The body was then laqcuerd..

picture014xn6.jpg

For the Nismo style bonnet we went black with the light blue on the vents, again more Mipa Gemini and lacquerd..

picture030vc7.jpg

picture032er6.jpg

Same goes for the boot and new drag rear wing..

picture040fv3.jpg

The car then went to Andy Robinson Race cars for all tubbing, rear end, suspension etc, and GTart for the new engine,

picture044se5.jpg

picture043zt1.jpg

picture042zw8.jpg

And the finished car looks like this now..

picture060kf7.jpg

picture064fu8.jpg

picture065np3.jpg

Weighing in at under 1000kg and power up to 900hp at the rear, Some quick times should be seen out of the car this year :)

Link to comment
https://www.sau.com.au/forums/topic/179430-project-gtst/
Share on other sites

Thanks for the comments :P

Thanks for that, I thought John would have a thread on here someware and ties them now, Just started this one to show the paint etc :)

The last pieces to be painted was the new cam covers, for an OTT engine I whent for a OTT one off paint job..

picture01an2.jpg

picture02ay0.jpg

picture070vq5.jpg

picture067cx5.jpg

Edited by DriftyR33
Link to comment
https://www.sau.com.au/forums/topic/179430-project-gtst/#findComment-3271715
Share on other sites

Mike you are a legend mate & gutted that you'll be leaving the UK you lucky lucky bugger :laughing-smiley-014:

Huge thankyou & amazing work you have done over the last few years not just for me but countless people here in the Uk.

Guys if any of you live near Perth pop & see Mike, with a spray gun in his hand - amazing >_<

he's also a raging alcoholic :laughing-smiley-014: - thats a different story !!! - lol

See you in March Mike in Aus mate - get the beers in the cooler !!!!!!!!!!

Thanks for the comments :D

Thanks for that, I thought John would have a thread on here someware and ties them now, Just started this one to show the paint etc :)

The last pieces to be painted was the new cam covers, for an OTT engine I whent for a OTT one off paint job..

picture01an2.jpg

picture02ay0.jpg

picture070vq5.jpg

picture067cx5.jpg

Link to comment
https://www.sau.com.au/forums/topic/179430-project-gtst/#findComment-3272714
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...