Jump to content
SAU Community

Recommended Posts

Finally fitted the plenum to my car. It went on the same time as a Hybrid intercooler kit, and GFB plub back BOV.

It was a bit of a drama to fit, but I think it was well worth it in the end.

Here's a couple of pics:

post-3204-1193459712_thumb.jpg

post-3204-1193459760_thumb.jpg

It definitely doesn't feel any laggier than before. The large throttle body does make it feel more responsive, as it now takes less throttle position to have the same effect as the stock one.

Hopefully I'll have it on the dyno (to get re-tuned) sometime this week, so I'll let you know what numbers it puts down.

Interesting throttle body, where did you pick that up from?

I purchased it as a package (along with the plenum) on ebay. I had my choice of 80mm, 90mm or 100mm!!! I decided to go for the 80mm option, as the others seemed like overkill for the power output I'm after.

The car seems to be idling and starting better than it did with the standard throttle body. So I have no complaints.

I've had a read through the 'how to' guide for the Greddy copy plenum, and it seems like the issues I had to overcome on fitting this plenum, are very similar to what he had to go through when fitting the Greddy one.

I highly recommend this plenum and throttle body as an alternative to Greddy's plenum (or copy).

Did you have to muck about to fit the tps or did it bolt up? I've seen the TB's on ebay and often wondered if it would work

Very interested to see a before and after dyno.

Yeah we did have to modify the TPS, as the one I was sent suits other Nissan models (like pulsar) but not mine. I emailed the guy about it, and he said it was his mistake for not asking what engine model I have - so he's sending out the correct one.

Will post up the dyno results later this week (if I can get in to see the tuner).

Unfortunately I wasn't able to get in to see the tuner this week, and I'm going away for work this weekend, so I won't be able to get it re-tuned for a while.

What I can say though, is that I have gained some low end torque (which was completely unexpected)... My GT-RS now builds positive boost at just below 2000 rpm (in the taller gears) - about 500 rpm earlier than with the standard plenum. Even without the re-tune, this plenum is an awesome improvement.

Ryno

  • 1 month later...
  • 5 months later...

I know of a certain 2JZ with a KU engineering Plenum and TB making 430rwkw, And a GTR that went 2seconds faster a lap (Mallala) after installing one. I am also looking at using one for my RB31DETT.

FYI

RB20, RB25 use the std runners

RB26 have KU Engineering cast runners to replace the throotle bodies

Edited by BoostdR
  • 3 months later...
  • 2 weeks later...

Sorry for the lack of updates, I've been unable to get on here for the last 6 months or so...

When the car was dyno tuned, it made 240 rwkw at 17psi - Which should equate to about 260rwkw on Unique Autosports dyno. As with my previous dyno tune when I went from my tuners dyno to the Dyno day at Unique it made about 10% more power.

It is a dream to drive, even on low boost (12psi) the car is a missile. I would recommend this upgrade to anyone.

  • 5 months later...

If you use msn his email address is: [email protected] and his name is Jack, I bought my rb20 intake firstcly with him he also supplied me with a rb26 fuel rail and custom adapters to suite the rb20 mounts.

Nice guy pleasure to deal with :D

  • 4 months later...

hey guys sorry for bringing up an old thread but I've done some searching on here and I didn't want to pester everyone by kicking up another new thread.

I asked about a greddy style plenum on here not too long back - I got a reply from a company called performance-wise. I've dealt with this chap a few years ago and bought a PowerFC for my first 33gtst at a great price.

anyhow I got a pm for a greddy style plenum from this chap - I tried putting up the pic but it wont let me strangely so here's a link...

http://www.skylinesaustralia.com/forums/ms...25det-intake-ma

$460 shipped from uk - seems like a great price but my question is would it cause any issues? I've heard all kinds of thoughts on proper Greddy/Trust ones vs copies. I have to say I doubt theres any blinking difference, but seeing as you guys have tinkered with these cars over there far more than us backyard enthusiasts have here.

I'd appreciate your thoughts on this - I cant afford a true Trust/Greddy one (are they the same company?) so a copy would have to do but would I be looking at any tinkering/butchering to get it to fit?

thanks!

anthony

uk

  • 8 months later...

so its been a couple of years now and i am curious to see how many people run these plenums now

it seems they are also catering for neo engines which is good as genuine and fake greddys do not alot neo owners to use all the standard idle control etc

any updates would be awesome!

I running one now, and a guy around the corner from me was running one on his 25/30 and the guys at EFI in QLD were suprised at how much torque it was making. He selling it and a throttle body too suit in the for sale thread is anyone wants one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...