Jump to content
SAU Community

Recommended Posts

Guys it was my bad about the information provided to the workshop mentioned in this thread with regards to compatibility since I mixed up the model numbers. Usually I refer to the Nissan vehicle designation (WC34) rather than trim codes

RS4 Series 1 and 260RS cannot be Nistuned but RS4 Series 2 (with RB25DET NEO) can be. Anything which has ECU part number 23710-0V8xx in it can be done with Nistune Type 4 boards. Hope that helps

Edited by darkhalf
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-5669785
Share on other sites

  • 4 weeks later...

You emailed me this q over the weekend? Not replied yet but only VLT, S13 CA18 and HCR32 currently have knock reporting active

Other models dont yet because I have to dig through Nissan/JECS code to find the memory locations where knock is recorded and add extra code to spit it out the consult port. Currently BNR32 and Z32 have identified locations but cant seem to get it working yet

So your knock count will be zero. I'm going to hide this gauge to avoid future confusion

As for the 'consult guages' not appearing, check under 'windows' menu and cascade them in case its hiding off screen for some reason

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-5714473
Share on other sites

yeh hehe

consult gauges work, thats the window we had open during tuning, but the multiple consult gauges only opens 3 windows, inj duty, knock count and TP..

when i first got it and had the consult plugged in, the multiple gauges were working

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-5714915
Share on other sites

Havent read anything in this post for a long time but i thought i might input this:

Ran a RB31/26DETT without problems.

R33 GTST S1 harness without VCT hooked up

Q45 Throttlebody

Twin Q45 AFMs through Apexi SAFC-II (2 in 1 out with average output)

1600CC injectors through GTR resistor pack

R32 GTR coils

and much more..

While it was beeing built:

889668_xpltrp.jpg

Worked a treat, sad to see the engine gone, sold it some months ago.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-5715246
Share on other sites

How accurate is the 'timing' displayed in the nistune consult gauges for setting base timing ??

That's like getting a blank ruler, randomly drawing a centremeter mark on it then going how accurate is it for setting the base cm mark on other rulers....

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-5724244
Share on other sites

How accurate is the 'timing' displayed in the nistune consult gauges for setting base timing ??

It is as close as it gets .. given that you have aligned the timing mark on the crank pully with what Nistune displays ..

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-5724378
Share on other sites

  • 4 years later...

Whats the max hp the Nistune type 4 can handle. Is it suitable for a 30 25 neo with gtx3582r freddy plenum 1000cc injector hpx1 airflow meter.

Will it be up to the task

Scroll back a bit ^^ to Brother Davids's set up - reckoned it was ok at 700hp

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-7691640
Share on other sites

HP is relative to the AFM, however using those HPX ones inside of a 3" pipe will give you the resolution needed.

Just need to be smart with the TP Load scaler :)

I love Nistune, especially with the feature pack. Launch and flex support, albeit I've yet to setup a car with the flex support on it. Should have one of the Nissan Silvia boys doing it in a few months.

Link to comment
https://www.sau.com.au/forums/topic/181930-nistune/page/18/#findComment-7691755
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...