Jump to content
SAU Community

Bass's New Wheels.........


Recommended Posts

Hey ppls.

From my little coming together of industrial screw jacks and my front wheels, and the subsequent hole in both tyre and rim, and the face that I need new rear tyres anyway, Bass is getting new rims.

18x8 and 18x9

The choices are as follows.........

Second hand Volk GT-C, 18x8 set of four, Polished lip, bit of dish. I'd spray the centres in a gloss black with heavy gold flakes.

New Works XD9 in bronze, 18x8 and 18x9. Got some dish tough race look.

Buddy Club P1 Racing II, 18x8 set of four Polished lip, would paint centres same black with gold.

R34 GTR Rims, which I'd also paint the centres black with gold. Forged. GTR Tough.

I'm having a lot of trouble choosing.

$2k is approx spend on wheels.

As you all know, car is R34 GTT in Platinum Silver colour.

Help me SAU, you're my only hope.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/184796-basss-new-wheels/
Share on other sites

  • Replies 184
  • Created
  • Last Reply

Top Posters In This Topic

Second hand Volk GT-C, 18x8 set of four, Polished lip, bit of dish. I'd spray the centres in a gloss black with heavy gold flakes.

Kinda like this, but on a silver R34, and with black centers. So, basically pretty much nothing like the picture below lol

03web.jpg

Edited by abu
Say no to the R34 GTR wheels and GT-C.

Only because i love you will i tell you the rims that i woudl be jealous off...

RPF1.jpeg

They are Enkei RPF1 ... awesome lookign wheel when you get into 18s with a nice offset :(

:) I love those wheels. Not a common choice though these days with everyone going Rays

See, these wheels are the 2nd best kept secret of a cool wheel, that you dont see on every Joe Blows car...that is uber light and great quality. I want a set of these wheels for my car...but $$$$. DO IT! They will look the part provided you canb keep the offsets under +30

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...