Jump to content
SAU Community

Recommended Posts

I came accross the Stillen Cold air for the G35.

http://www.intensepo...hicoairbox.html

do you think it would fit in our M35's? comparing between this and my sisters V35. the box is the same.. would the AFM tell it to f**k off in other words.. lol

Yes, It does fit.. Danny had it fitted to his Gold ARX when he had it.

I came accross the Stillen Cold air for the G35.

http://www.intensepower.com/sthicoairbox.html

do you think it would fit in our M35's? comparing between this and my sisters V35. the box is the same.. would the AFM tell it to f**k off in other words.. lol

Yep, as Andy said, straight bolt in... but sadly it is canary material in Vic (you already have the FMIC)

yeh but it looks stock...and its sooooo nice.. :( thanks for ruining me cam haha

Would they notice it though? coz it looks stock right?

You see the pod through the powerduct

I've seen the setup...it is nice....sounds good too.....why is it defect material.....the POD is separated from the engine bay?

irrelevant. One intake mod allowed in Vic.

Aaron has a FMIC so that is it for legality.

You see the pod through the powerduct

yeh but.. :(

irrelevant. One intake mod allowed in Vic.

Aaron has a FMIC so that is it for legality.

but the standard is FMIC. which means its just a replacement right :ph34r:

I came accross the Stillen Cold air for the G35.

http://www.intensepower.com/sthicoairbox.html

do you think it would fit in our M35's? comparing between this and my sisters V35. the box is the same.. would the AFM tell it to f**k off in other words.. lol

It could, why dont you buy one and see mate? :)

  • Like 1

lol ok me and scott decided. this is happening after my first tune. so the addition of it being added can actually be determined as worth it or not.

if its an 11 hp gain for vq35de then it should be huge for a forced induction - with the addition of a larger suction pipe.. plus i'll find a loop hole before then.

Looking at Stillen's site:

http://www.stillen.com/product.asp?id=STIZTBE01&c=PE&year=2003&make=INFINITI&model=G35%204DR

What's the 2nd kit? a straight tube?

Interesting that no one's got a CAI on the M35 yet...which means the stock air box is...tolerable?

Looking at Stillen's site:

http://www.stillen.com/product.asp?id=STIZTBE01&c=PE&year=2003&make=INFINITI&model=G35%204DR

What's the 2nd kit? a straight tube?

Interesting that no one's got a CAI on the M35 yet...which means the stock air box is...tolerable?

2nd kit is for N/A VQ35/25's.

You can get a pod and enclose it if you really want one. Blitz and M's have pod "kits" but they just sit behind the headlight.

Stock airbox with powerduct/home made powerduct will be sufficient.

the Z tube is a piece that goes between the AFM and the throttle body. The std G35/V35 PNM35 unit has all these baffles and shit that is designed to reduce intake resonance. This gets shafted in place for a straight tube off a Z33. more power(?) and better intake sound.

Wont fit on a NM35

Edited by PN-Mad

Hi,

I have been lurking here for a while now......

I have been wanting to get a Stagea for about 7 or 8 years and I am finally about to make the move.

I am looking at M35's but after hours on this thread and others I am a bit concerned about the turbo issue.

Are they guaranteed to go about 100,000km, or is it just a few that it happens to? And would an ARX4 be worse due to the higher boost?

As far as I can tell this is this case and the repair bill can be around $2k.

If anyone could clarify it would me much appreciated.

Cheers

Hi,

I have been lurking here for a while now......

I have been wanting to get a Stagea for about 7 or 8 years and I am finally about to make the move.

I am looking at M35's but after hours on this thread and others I am a bit concerned about the turbo issue.

Are they guaranteed to go about 100,000km, or is it just a few that it happens to? And would an ARX4 be worse due to the higher boost?

As far as I can tell this is this case and the repair bill can be around $2k.

If anyone could clarify it would me much appreciated.

Cheers

NO guarantees on the turbo's at all, I have been told of them failing as low as 50'000km (but that car was found to have at least 50'000km would back on the clock) and I know mine was still good at 125'000km (ARX). Whilst it was still working, it was starting to go as oil was leaking from the bearing. I think if you look after the car, change oil every 7000km as a minimum with quality oil you could see 150'000km from this turbo. You are going to have to hope the previous owner looked after the car as well as you would.

If you need to change the turbo, there are a number of option to rebuild the turbo. You can have it rebuilt the same size from about $800 or a large high flow up to $2000. The removal of the turbo and replacement is the hard work. The best method is to remove the motor and gear box. This is about 6 hours of work so a few dollars there.

If the turbo worries you, have a look at the PM35, the NA version of the same car with a 3.5L motor. Very good car, newer and a little more expensive. They are available from North Shore Prestige.

Good luck with your decision.

Cheers

Andy

  • Like 1

i own an m35 with 117k on the clock - probably more as the cluster HAD been removed at some stage before - and its still going

also have another one with 105k on the clock and its also running fine.

if you look after it, it will keep going.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...