Jump to content
SAU Community

Recommended Posts

Yeah the one on page 44 was the one i liked, would need to see log books to see if kms wound back....would hope not

Certainly a nice looking car; I really like the Kenstyle kit in black. Kays do seem a little low for a vehicle of it's age though.

Not saying it's impossible; but as has been pointed out in the past, it would be a better bet to look at a car with 70,000km on it as they're more likely to be honest rather than a 40,000km car that probably had over 100,000km prior to being wound back, because it had nice paint.

The big clues to look for on these if you suspect high kays (but can't see them) is wear on the steering wheel and pedal rubbers. Pedal rubbers are easy to replace, but the Wheel is mostly overlooked. If the steering wheel has evidence of wear (surface worn through) or is very shiny, I'd be really suspicious.

Obviously the usual; seats, trim, general looseness still applies to high kilometre cars. Although having said that; these are put together quite well and they do seem to weather quite well. This was brought home to me when I drove a mate's 2005 XR8 Falcon last week. Paint & trim are beautiful, has about 10 grand worth of add ons (exhaust, intake, tune shift kittted auto, brembo's and suspension upgrades) has dyno sheets for 300rwkw and it is maintained obsessively. It honestly drove like a 15 year old car; rattles & squeaks EVERYWHERE and virtually every bush is due for replacement.

And really not that quick either. Doughy down low and when it finally does start to kick, your only 1500rpm from redline! V8? Pffft!

I was so disappointed; I gave him the keys to mine, and sent him on his way. He came back half an hour later; absolutely crestfallen at how much better resolved the Stagea was as a "performance" car and I doubt it would top 150awkw. On a winding road, you'd round up this Falcon and be gone into the distance before it decided what gear it was going to choose.

Back on topic pinch.gif

Super low kay Jap cars DO exist; but if they truly were low for a car of this age, you'd expect to be paying a premium for the privilege.

My 2 (50?) cents.

Edited by Daleo

Hate to nitpick Dale, but it is a Dayz kit on that black M35. :)

As it stands, I'd have no issue buying an M35 that has over 100,000kms on the clock (depending on price of course).

Besides the turbo, they are a damn solid car.

Hate to nitpick eh? Lol, all good; I'm the king of gettin' it wrong...

I agree though, it's interesting how some people will pass up a tidy car with some kays, for one with lower kays, in worse condition.

Hate to nitpick eh? Lol, all good; I'm the king of gettin' it wrong...

I agree though, it's interesting how some people will pass up a tidy car with some kays, for one with lower kays, in worse condition.

Speaking of decent kays.. I noticed Iron Chef has an ARX advertised for landed and complied at $11k. Cream leather interior (not the baby puke orange one), 100k on the clock.. Pretty good deal by the sounds of it - Id presonally budget for a turbo changeover if buying it, but even with that in mind its a bit of a steal.

hey All

I am looking at buying a AR-X from Iron Chef Imports. It has leather seats and from the pictures a Bose system. As well as all the AR-X options.

The question is what are the AR-X options? Is there anywere I can go to fiind out the factory options? Is there a Model by Model options list here in the forum? I noticed the info on page one of this thread but nothing that will tell me what models are the base models and what are the top of the line. Just wanted to know everything before i hand over cash as i will have a 2-3 month wait before it arrives.

ARX options in mine are

twin sunroof

rub guards

18"

tanned leather

seat warmers

LCD screen

electric passanger seat

remote start

and jacked up suspension for off road style

thats all i can remember.. and mine didnt come with a Bose, but it still sounds pretty insane as scott knows.

good luck mate!

Standard Options on the ARX above a RS/RX are:

* 18 inch wheels (10mm wider wheel track)

* Wheel flares

* LSD

* V-HICAS (active rear wheel steering above 40km/h)

* Leather seats

* Electric & Heated front seats

The rest is all option.

Hi,

Before I say "I want a M35 Stagea, what should I do," I have done a bit of research on them, in hear and other places, so I'm not completely lazy

Q1: What is the difference between the - '250 T RS Four', 'RS Four' and T RS Four" ???

Q2: How much does the Turbo cost to fix?

Q3: Has anyone owned one of these and a WRX Wagon/Hatch? Comparisons? I know this has heap more functionality but in regards to performance/practicality? Indeed, what is the performance like? ie acceleration, cornering and braking?

Q4: Can you tell if the clock has been wound back?

Q5: The Visual Display Unit, I understand it's useless without some modifications or conversion? I have no idea what this entails but how much does it cost? I want mine to be functional at least. Does the VDO include GPS and can this be updated?

I'm from Tassie, I understand NorthShore Prestige Motors are fairly reliable and they ship the car free of charge which is excellent. Is the Skyline Community tight-knit enough that I could buy the car from Northshore, get the mods done to the VOD and have it shipped?

I haven't seen any down here so it's a bit hard to really get an idea of performance etc

Thanking you in advance for any help

Edited by Drogba

Hi,

Before I say "I want a M35 Stagea, what should I do," I have done a bit of research on them, in hear and other places, so I'm not completely lazy

Q1: What is the difference between the - '250 T RS Four', 'RS Four' and T RS Four" ???

Q2: How much does the Turbo cost to fix?

Q3: Has anyone owned one of these and a WRX Wagon/Hatch? Comparisons? I know this has heap more functionality but in regards to performance/practicality? Indeed, what is the performance like? ie acceleration, cornering and braking?

Q4: Can you tell if the clock has been wound back?

Q5: The Visual Display Unit, I understand it's useless without some modifications or conversion? I have no idea what this entails but how much does it cost? I want mine to be functional at least. Does the VDO include GPS and can this be updated?

I'm from Tassie, I understand NorthShore Prestige Motors are fairly reliable and they ship the car free of charge which is excellent. Is the Skyline Community tight-knit enough that I could buy the car from Northshore, get the mods done to the VOD and have it shipped?

I haven't seen any down here so it's a bit hard to really get an idea of performance etc

Thanking you in advance for any help

ill answe the performance bit as say it will take alot more to squeeze out 900nm out of a WRX Boxer engine, than a Stageas VQ25DET

ill answe the performance bit as say it will take alot more to squeeze out 900nm out of a WRX Boxer engine, than a Stageas VQ25DET

I'm not really looking to tune it but thanks anyway. In saying that, I wouldn't be totally averse to buying a tuned car, I'm just not one to invest money in something that isn't going to give me a return.

Q1: What is the difference between the - '250 T RS Four', 'RS Four' and T RS Four" ???

250T RS Four = VQ25DET with ATTESSA.

250 RS Four = VQ25DD with ATTESSA

T = turbo

Four = ATTESSA AWD

Q2: How much does the Turbo cost to fix?

Not sure. Everyone's been hi flowing them....starts from $900 (hypergear)

Q3: Has anyone owned one of these and a WRX Wagon/Hatch? Comparisons? I know this has heap more functionality but in regards to performance/practicality? Indeed, what is the performance like? ie acceleration, cornering and braking?

Stock vs Stock, the WRX would be superior in every aspect I'd say. Mods vs Mods I'd think the WRX still has the edge due to its weight advantage...

Q4: Can you tell if the clock has been wound back?

Not sure - but you can tell the cars age by checking everything else (interior, exterior, wear and tear etc)

Q5: The Visual Display Unit, I understand it's useless without some modifications or conversion? I have no idea what this entails but how much does it cost? I want mine to be functional at least. Does the VDO include GPS and can this be updated?

GPS cannot be used here...to use the VDU you'll need (well, yuo don't HAVE to) get a translation done. Andy & Ducati are the people to speak with...

I'm from Tassie, I understand NorthShore Prestige Motors are fairly reliable and they ship the car free of charge which is excellent. Is the Skyline Community tight-knit enough that I could buy the car from Northshore, get the mods done to the VOD and have it shipped?

Don't see why not. Andy's in Sydney, so's Northshore...

Stock vs Stock, the WRX would be superior in every aspect I'd say. Mods vs Mods I'd think the WRX still has the edge due to its weight advantage...

WRX is smaller though isn't it? So wouldn't be superior in every aspect. Also every WRX wagon I've been in feels cheap inside compared to the M35. M35 feels more solid, and expensive. Just a nice place to be.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...