Jump to content
SAU Community

Recommended Posts

250T RS Four = VQ25DET with ATTESSA.

250 RS Four = VQ25DD with ATTESSA

T = turbo

Four = ATTESSA AWD

Not sure. Everyone's been hi flowing them....starts from $900 (hypergear)

Stock vs Stock, the WRX would be superior in every aspect I'd say. Mods vs Mods I'd think the WRX still has the edge due to its weight advantage...

Not sure - but you can tell the cars age by checking everything else (interior, exterior, wear and tear etc)

GPS cannot be used here...to use the VDU you'll need (well, yuo don't HAVE to) get a translation done. Andy & Ducati are the people to speak with...

Don't see why not. Andy's in Sydney, so's Northshore...

Thanks Buddy, that's given me a much better idea.

WRX is smaller though isn't it? So wouldn't be superior in every aspect. Also every WRX wagon I've been in feels cheap inside compared to the M35. M35 feels more solid, and expensive. Just a nice place to be.

My original post was in relation to performance, not functionality or quality. I can tell from the pictures that the Stagea cremes the WRX for quality of fitout.

The Stagea looks large and cumbersome. I've driven my old mans Ford Territory and that feels cumbersome.

Would people describe the Stagea as a Gran Tourer, more than sporty OR is the suspension stiff enough that body roll isn't an issue when pushing it around bends.

Edited by Drogba

WRX is smaller though isn't it? So wouldn't be superior in every aspect. Also every WRX wagon I've been in feels cheap inside compared to the M35. M35 feels more solid, and expensive. Just a nice place to be.

Hey he wasn't asking about the interior ;p

lol, stock RS with exhaust (no dump) vs stock WRX with exhaust.

WRX wins from standstill, but rolling start RS should eat a GD WRX (speaks from experience)

Hmm maybe Ur right. I just think with our gimped throttle and weight that a Rex would be superior...

My original post was in relation to performance, not functionality or quality. I can tell from the pictures that the Stagea cremes the WRX for quality of fitout.

The Stagea looks large and cumbersome. I've driven my old mans Ford Territory and that feels cumbersome.

Would people describe the Stagea as a Gran Tourer, more than sporty OR is the suspension stiff enough that body roll isn't an issue when pushing it around bends.

You are talking about a stock family wagon, of course it wont have race suspension under it but there are plenty of options if you want a firmer ride. Stock they are just a wagon.

Most of us look to upgrade to coilovers and stiffer sway bars. The brakes can be upgraded very easily, the power/torque can nearly be tripled without opening the engine and with just a highflow turbo. They can be as sporty as you want them to be, certainly not Territory cumbersome but not light either as they weigh around 1800kg.

Operative word there is "Family." That's been the problem with the lack of information on the net. I couldn't even figure out what market it was aimed at. So, stock it's nothing too dynamic but some minor mods and you can have the best of both worlds.

Upgraded coilovers, swaybars and turbo, how much am I looking at here for that. If it costs too much it could be cheaper just to buy a WRX wagon.

I think these sort of cars are the way of the future. Luxury and performance without looking like you've got a small wang. If had infinite money i'd go the new Ferrari FF or the Audi RS6 Wagon.

The natural balance of the Stagea M35 is the best on the market for the wagon with weight distribution 52% front axle and 48% rear axle. This is a great start for handling but it can be easily improved with the fitment of sway bars alone.

I can do the language conversion on a series 1 M35 at NorthShore easly as my work is not far away.

Cheers

Andy

Put it this way, I have surpassed the performance of the RS6 Wagon, great handling and nice modern interior for a quarter of the cost of the Audi. (That's my pick if I had the cash.) No plod have ever shown interest in it either, just the way I like it.

The natural balance of the Stagea M35 is the best on the market for the wagon with weight distribution 52% front axle and 48% rear axle. This is a great start for handling but it can be easily improved with the fitment of sway bars alone.

I can do the language conversion on a series 1 M35 at NorthShore easly as my work is not far away.

Cheers

Andy

Thanks Andy,

What price region am i looking at to get this done?

Put it this way, I have surpassed the performance of the RS6 Wagon, great handling and nice modern interior for a quarter of the cost of the Audi. (That's my pick if I had the cash.) No plod have ever shown interest in it either, just the way I like it.

You've surpassed the performance of a car holding a lambo Twin Turbo V10! Be Jebus

I should be able to crack 11's fairly easily once the new turbo goes in, if it all holds up. What do the Audi's do out of the box?

Looks like we have nailed that car.....what's next!........you just got to work on cracking that 171.5km/h Scott :P....lol. Without the limiter(which I don't have) and with these ratio's I am pretty sure these cars would be good for about 250km/h......but an RS6 is made to cruise on 250km/h....but how often do you do those speeds.

I have to say that the last time I drove a WRX I was completely unimpressed!

20K(car) + 10K-12K(mods) and it should match an RS6........then you can have a couple of toy's in the Garage as well with the change.

Edited by Jetwreck

It will run off the stock ecu to a point, but it will run like ass and possibly hit airflow cut as the ecu isnt tuned for the extra airflow. My suggestion is not to go too large and if you don't plan to run the emanage eventually, keep the wheels almost stock sized. (or just replace the turbo with a stock one)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...