Jump to content
SAU Community

Recommended Posts

Probably not. Says "Owners Manual" not "Service manual". I'd have to have a look at whats in it before I'm prepared to buy one. I'm not sure I even need an owners manual.

Yep, original request to those guys was the full workshop manual back in 2008 (http://www.skylinesaustralia.com/forums/topic/232599-translated-workshop-manual-m35-c34/ )

Also, it states for 2001-2007 Stagea, but no mention of VQ35de? WTF?

I know the answer is here but I can't find it in a rush.

Attessa system fluid - same as the transmission?

Glad I'm not the only one that struggles to find anything.

90 pages of 'info' is more like 'comment on stuff about the M35.'

:rolleyes::ph34r:

To those who've rewired their fuel pump, where did you run the wiring from the battery into the cabin?

I was looking at it today and thinking the easiest way would be to drill a hole in the side of the duct where the cabin air filter is, and put a rubber grommet in. Most obvious place anyway...

Just slide it throug the main wiring grommet, behind the battery, then down the passenger side and along the back seat.

I've got so much stuff going thru there that I've left a permanent draw wire.

  • 2 weeks later...

Thinking about how I'm getting the Fcon tuned, and more and more I'm thinking I should just go 98 for now. E85 isn't plentiful enough, 98 would just be easier.

If I go that way, I'm already changing the fuel pump and filter, and I've got the wideband.

Would I still need to change the injectors and/or fit a FPR for a 98 tune running the standard turbo?

I can't see you needing bigger injectors with the stock turbo. From what it seems, if you run ~20psi on stock turbo it will die quick ish.

If you tune with the stock boost (allowing extra 1-2psi for exhaust upgrade) it would need the rich factory set AFR leaned out a tad so the injectors should be fine.

Edited by slippylotion

^^^ what Paul said.

Thinking about how I'm getting the Fcon tuned, and more and more I'm thinking I should just go 98 for now. E85 isn't plentiful enough, 98 would just be easier.

If I go that way, I'm already changing the fuel pump and filter, and I've got the wideband.

Would I still need to change the injectors and/or fit a FPR for a 98 tune running the standard turbo?

As soon as you go the full hog on you intake pipe you will have a top end lean problem with standard injectors & fuel pump. Andy got good results (AFRs richened up nicely) just by changing the fuel pump. My injectors are providing enough fuel just by changing fuel pressure regulator (stock pump). So if you planned to do either of those, & you've already got the pump, then you'll be fine.

I'm of the belief that our standard injectors can be sufficient up to maybe 250kw or more), given a bit of extra pressure to increase the flow. Check out 'injectors online' to see what sizes are used in various factory applications. eg according to that website, Gen III 5.7lt motor uses 260cc, XR6 (including turbo) use 295cc. M35s are 370cc, & when given extra pressure (there's a formula around somewhere) they can flow in the vicinity of 440cc/min.

^^^ what Paul said.

As soon as you go the full hog on you intake pipe you will have a top end lean problem with standard injectors & fuel pump. Andy got good results (AFRs richened up nicely) just by changing the fuel pump. My injectors are providing enough fuel just by changing fuel pressure regulator (stock pump). So if you planned to do either of those, & you've already got the pump, then you'll be fine.

I'm of the belief that our standard injectors can be sufficient up to maybe 250kw or more), given a bit of extra pressure to increase the flow. Check out 'injectors online' to see what sizes are used in various factory applications. eg according to that website, Gen III 5.7lt motor uses 260cc, XR6 (including turbo) use 295cc. M35s are 370cc, & when given extra pressure (there's a formula around somewhere) they can flow in the vicinity of 440cc/min.

I would agree with you on the injectors Leon as even at 18PSI with my car my Wideband never gets over 10.8 unless under load going up a hill then is gets to 11.1. However the AFM is well and truly maxed giving readings of 5+...and I know my duty cycle is over 95% at times....I have also seen 100% quite a bit......I can live with that on the street as I am hardly ever up it.

However I would never track it without bigger injectors and the AFM clamped.

P.S. I think its awesome how the car has worked out its tune with the extra pressure at 14v with the Walbro on mine....it would be very interesting to try a set of 440cc injectors in the car with the standard fuel pump to see if/how it runs.

However I would never track it without bigger injectors and the AFM clamped.

P.S. I think its awesome how the car has worked out its tune with the extra pressure at 14v with the Walbro on mine....it would be very interesting to try a set of 440cc injectors in the car with the standard fuel pump to see if/how it runs.

Well that's kind of my plan. Do pump and get tune with MAP sensor.

Will that cause an issue if I do some track work?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...