Jump to content
SAU Community

Recommended Posts

If the tune is correct and you have a bit of headroom in the injector, you shouldn't have an issue.

If your maxing out your duty cycle and your cheating by bumping up the base fuel pressure just make sure the flow pattern of the injector is still up to spec. Some injectors get very messy when you up the base pressure. I prefer standard base pressure and run the CORRECT sized injector for the application.

If the tune is correct and you have a bit of headroom in the injector, you shouldn't have an issue.

If your maxing out your duty cycle and your cheating by bumping up the base fuel pressure just make sure the flow pattern of the injector is still up to spec. Some injectors get very messy when you up the base pressure. I prefer standard base pressure and run the CORRECT sized injector for the application.

I'm with you on that paul

Sounds good then.

I'm getting close to maxing out the AFM, but injectors should be fine.

For me, this is a decision between throwing in the ID1000s now, or when I eventually do an E35 tune. If I need them now, I'll put them in. But sounds like I don't?

Car is running stock turbo and only half an intake pipe. Not the most serious mods.

I would agree with you on the injectors Leon as even at 18PSI with my car my Wideband never gets over 10.8 unless under load going up a hill then is gets to 11.1. However the AFM is well and truly maxed giving readings of 5+...and I know my duty cycle is over 95% at times....I have also seen 100% quite a bit......I can live with that on the street as I am hardly ever up it.

However I would never track it without bigger injectors and the AFM clamped.

P.S. I think its awesome how the car has worked out its tune with the extra pressure at 14v with the Walbro on mine....it would be very interesting to try a set of 440cc injectors in the car with the standard fuel pump to see if/how it runs.

Craig, I am impressed that your car runs so well on stock injectors, with just the fuel pump pushing more through (thought you might've surpassed that). I'm still tuning mine (adding fuel mainly) but my max injector duty cycle is 90% as of today. After the intake went in, but before the FPR, it was close to 100% on occasions.

I think 440cc injectors & standard pump would be a similar result to the opposite (Walbro & std inj). Do you think the ECU would learn it over time?

And Paul, I too agree. In a perfect world with lots of spare time and/or cash you would correctly size the injectors & leave fuel pressure alone. But the point I was making was that it wasn't necessary to stress over injector sizing with the mods that I or Ryan have done thus far. Especially since upgrading the fuel pump gives higher pressure as a by-product. Can't see anyone would change the FPR to a lower pressure just to counter the new pump, lol.

  • 3 weeks later...

There is a few Hypergear turbos getting around, I doubt any have been tuned so don't take the power output too seriously, yet.

Near factory response is hard to believe too, it looks about the size of a Sierra stage 1 so it will probably come on around 3k. Not a bad price though Stao. :thumbsup:

There has been bit development in that high flow as I had a customer whom own a work shop near by was happy to trail all of the combinations and the best felt on road is some thing in between a 3071 and 2871 with custom trimmed up turbine wheel with FNT turbine modification. It is touch smaller then the usual profile that I normally run in the skyline turbos which some of you noticed the HP rating isn't as high.

I've also modified the bearing housing so they can work with stock oil supply, braided oil line is no longer required.

Test car was a auto M35 with cooler and exhaust only and that high flowed turbo was excellent to drive with on road. I believe the best option is running the SS1PU on the VQ25. I'm consider making a custom mould for when more M35s comes into the country.

The stock housings flow ok, all you need is a spare set so the wait time is reduced. I haven't seen any of these turbine housings cracking yet either Stao which is good.

Someone fit one and get it tuned... :D

  • 5 weeks later...

Can anyone who has installed a power steering cooler tell me where the best place is to connect the cooler?

Anything fancy that's required or just replace fluid at the same time?

Hasn't been replaced yet, figure I can use the Valvoline auto trans fluid I've got left.

Loop it through one of the lines going into the bottom of the radiator

no dont do that, thats for the transmission cooler circuit.

put it before the pump, you can use the hoses running up the the filler bottle. keep the stock ones, and just replace the hose with good quality type

no dont do that, thats for the transmission cooler circuit.

put it before the pump, you can use the hoses running up the the filler bottle. keep the stock ones, and just replace the hose with good quality type

Cheers Iain. Do you know offhand what size the hose is?

Thanks!

  • 2 weeks later...

Does any one know if the VQ35DE airbox is the same as the VQ25DET airbox? Or is they can be swapped?

Same airbox(PM35,V35,NM35,G35).......but the VQ35 comes with a power duct I think

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...