Jump to content
SAU Community

Recommended Posts

with my OS tripple I never stall it, can do hill starts no problem. even with a small 'take up zone' all you need is a small amount of clutch control to drive it easily. so practice up.

i call bulshit!! recall someone stalling when someone took me for a spin... lol

I think you guys need some serious driving practice. I haven't driven a clutch yet I couldn't get the hang of within half an hour.

I'll second that, I never have problems with any clutch after a few starts . You guys think the Nismo twin is bad in traffic........I would have to say its one of the best twins to drive .

The next best is a stocker full face plate but it won't hold much..

I had an unsprung HKS twin plate. The tuner stalled it, the shop owner stalled it and then I did. But I soon got used to it, first day I got stuck in a traffic jam on the freeway...every set of lights was a mini launch. You just have to be more switched on and purposeful in your driving. Sprung center doesn't require much concentration at all

I was helping out at the last SAU dyno day driving cars on and off the dyno. Even Daves tripple plate didn't get me although I was warned about it. What's this thread about again? I forget. Yeah, umm, you'll get used to it.

I think you guys need some serious driving practice. I haven't driven a clutch yet I couldn't get the hang of within half an hour.

I my own cars I've had standard, nismo single, heaving duty exedy single, OS twin (solid centre) OS tripple (solid centre) and quickly adapted to all of them. I've also driven tilton twin, carbon single, and various twins, singles and tripples.

with my OS tripple I never stall it, can do hill starts no problem. even with a small 'take up zone' all you need is a small amount of clutch control to drive it easily. so practice up.

i agree with you, but the single plate i had in my rb20 was with no exageration 100 times harder to drive than my os twins and the os twins were harder to drive than the os triple.

actually the os triple is real easy to drive for a big hp clutch

definately hard core singles are much less friendly that hard core twins and tripples. basically to get a given single to hold the same power as a given twin you need a much higher clamp force in the single (as you are working with half the surface area) so hard core singles are generally the worst.

definately hard core singles are much less friendly that hard core twins and tripples. basically to get a given single to hold the same power as a given twin you need a much higher clamp force in the single (as you are working with half the surface area) so hard core singles are generally the worst.

Fits my experience.

I still fight with the JB Full Monty in my GTR.

Jumping from car to car to 4wd etc and then get into the GTR occasionally - bastard red faces me every time. You try to be quiet/gentle taking off in traffic and it is easy to stall. If rolling ever so slightly its fine and you do get used to it again fairly quickly. I have noticed it is not a clutch to ride as it glazes quickly and needs a bit of harder action to clean it up. Can launch like a rocket though.

Just need bigger sunglasses and darker tint on the windows. lol

well some people have it and reckon it's easy to drive. they reckon mine isn't installed correctly...

it's actually really light, but has a hair trigger - on or off.

it's only done about 1,000kms, so might get better with some time.

it can be slipped, but I don't get 'used' to it as it get driven about once or twice a month :(

you might like it...

If I drive my GTR often, the ORC twin plate is great. It's only when I'm not thinking that it bites me.

The most annoying part about it that's dificuilt is that the friction point is more than half way out on the clutch pedal.... so you have to keep releasing your foot to almost the end of the pedal travel. That makes it hard to find and hit's as a surprise sometimes.

If it was closer to the firewall, it would be so so so much easier.

However, I've fallen in love with the clutch and wouldn't go for anything else now.

The most annoying part about it that's dificuilt is that the friction point is more than half way out on the clutch pedal.... so you have to keep releasing your foot to almost the end of the pedal travel. That makes it hard to find and hit's as a surprise sometimes.

If it was closer to the firewall, it would be so so so much easier.

yeah i found this was the biggest issue, you slowly bring it up... and up... and up... then POW!

update guys: im getting much better driving these twins now, only hill starts are a bitch, i just take my time hahaha. I wouldnt go for anything else in saying all this, as when it catches, it catched hard, and i love it, im so used to stalling the car, its become 2nd nature on the street, but yeh im down to about maybe once every 3 days?....getting there slowly:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...