Jump to content
SAU Community

Brand New Hdt Brock Vl Group A Wtf

steveo_r33

By steveo_r33,
in General Automotive Discussion

 Share

Recommended Posts

evil_weevil Grand Master

evil_weevil

Posted
Posted

Wow!!

wouldnt have thought 6 figures.....

I know there was one at an auction few months back - had around 50k on the clock and was around 50k - I think it actually got passed in!

I still dont belive these cars will get much more value as opposed to the 70's muscle cars.

Beer Baron Grand Master

Beer Baron

Posted
Posted

it will go big, mainly because of Peter's recent death. apart from the cool history aspect it's a pretty average car though >_<

give me the plastic pig group A walkinshaw any day thanks. :(

gazza750 Veteran

gazza750

Posted
Posted
i spoke to a guy who paid $150,000 for a walky with only 1200kms on the clock.

these aussie muscle cars values are getting a bit out of hand now.....

dont even have to be muscle these days

even a stock 250 xw 3 on the tree in average condition is pulling over 5 k these days

SilverECR33 Veteran

SilverECR33

Posted
Posted
pity it can NOT be a genuine original as delivered by GMH as stated or it would NOT have the infamous polariser on it

Brock added them after they left GMH

you should re-read the section "PRESENTS AS IT DID ON DELIVERY IN 1987 FROM HDT. "

Stinky Rooster Grand Master

Stinky Rooster

Posted
Posted

I'm gonna win lotto, buy it and enter it in the burnout comp at summernats just to piss off the purists. :P

Seriously, it shits me to see ads like that. Bloody thing was built to be driven, not make some anal retentive halfwit rich :(

sav man Grand Master

sav man

Posted
Posted
Pity GTS-R's arent worth that lol

There accouple in unique cars between $100,000 and $110,000. FUnny thing is 6 months ago they weren't werth 1/2 that. Dad has Gts-R #68 and almost sold it for $45,000, and he thought he was doing well. He's glad the sale fell through now.

mad082 Grand Master

mad082

Posted
Posted

there was a fella in gympie that had an origianl monaro that he sold for 6 figures. he sent it down to auction in brissy or sydney with a reserve of something stupid like 75k just for shits and giggles and it ended up going for well over 100k. he had owned it from new and still had the original receipt from holden for it.

dont even have to be muscle these days

even a stock 250 xw 3 on the tree in average condition is pulling over 5 k these days

but that is because they can turn them into replicas of the phase 2. but if you go and buy a dirty old torana you won't get that much for it unless it is 1 of the classic ones.

evil_weevil Grand Master

evil_weevil

Posted
Posted
there was a fella in gympie that had an origianl monaro that he sold for 6 figures. he sent it down to auction in brissy or sydney with a reserve of something stupid like 75k just for shits and giggles and it ended up going for well over 100k. he had owned it from new and still had the original receipt from holden for it.

but that is because they can turn them into replicas of the phase 2. but if you go and buy a dirty old torana you won't get that much for it unless it is 1 of the classic ones.

mad - was that the yellow one sold at the sydney motor show auction last year?

sounds like it!

the next most common thing is for people making/building/buying replicas

replica XU1's, SS hatches, GT's etc etc etc people are starting to buy them which of course, people who already own them think that there cars should be worth more..

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
There accouple in unique cars between $100,000 and $110,000. FUnny thing is 6 months ago they weren't werth 1/2 that. Dad has Gts-R #68 and almost sold it for $45,000, and he thought he was doing well. He's glad the sale fell through now.

Are you talking the VR/VS GTS-R from holden or the Nissan HR GTS-R?

They were a nice rare model aswell

(i was talking the Nissan hehe)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • Kinkstaah
      My BMW E39 528i touring

      By Kinkstaah · Posted

      @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...