Jump to content
SAU Community

Recommended Posts

Ive been doing quite a few home services over the years for people looking for a cheaper yet professional alternative then taking it to a workshop. I'm a mechanic and gas fitter by day, have several Skylines of my own and like to help out others with them. Have recently done several Stagea 100K services also. I'm not operating a business nor am i interested in starting one lol, However i am offering to help out people who need some work done during the weekends. It will be cheaper then a workshop but i dont work for free lol.

PM me if your interested.

Link to comment
https://www.sau.com.au/forums/topic/186453-car-servicing-100k-services-etc-etc/
Share on other sites

Simon has been doing all the work on my car for the past 6 months. before that it was Boostworx..

Have had same great results with both mechanics..

Kinda tells you the quality of simons work hey :domokun:

+repz

Christian

Simon, what would I be looking at for fitting a clutch to R33 GTS25t including machining flywheel?

PM me to let me know

Cheers :whistling:

Lee

PS was that you in the cream 32 on port rush rd as posted in the spotted thread?

sure was mate, thats my gf's car.

Clutches are one of the few things i wont do at my place, well on 33's anyway, A hoist is needed pref. 32 boxes are no worries lol.

I can however point you in the right direction for well priced yet good clutch jobs.

Cheers

Simon

sure was mate, thats my gf's car.

Clutches are one of the few things i wont do at my place, well on 33's anyway, A hoist is needed pref. 32 boxes are no worries lol.

I can however point you in the right direction for well priced yet good clutch jobs.

Cheers

Simon

Speaking from personal experience there Simon haha!! :D

yes and no, ive done the exact cooler and fit to my neighbours S2 r33 and i found the cooling pro kit lacked a few brackets and clamps, which meant stuffing around a bit. But otherwise its around a 3 hour or so job. I like to take my time when it comes to trimming the bar since this its the most visual area.

chuck it in your sig mate, ive had very good results with me offering my services

yeah Dan does the right nut :D between the to you got a couple of half nuts

BTW who do you recommend for clutch jobs

Edited by Madaz

One of my mates also runs his own business from his house.

His name is Mark and his business is Fuel Automotive, he is a diesel Mechanic by trade and does all the work on my car.

He does all mechanical work no matter how big or small and is much cheaper than a workshop.

If you would like to use his services you can PM me and i will give you his number.

Please remember that he only does this stuff in his spare time as he has a full time job.

^Shaun, sounds like the same guy who works on Martin (HOSTILE) and PureSX's cars. if you can PM me a number for him, I'd be interested to get a quote from him.

Cheers

Hotwire you are correct as we are all close friends

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...