Jump to content
SAU Community

Recommended Posts

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

wha? i hope not. :banana: we need good shops and guys that are willing to try different stuff. from the pics and info in this thread stu is well up there. i know things are pretty rough at the moment though. :P

anyway, hopefully you can keep going in some capacity mate. :sick:

thanks for the kind words guys, but as you have heard i have closed the workshop indefinately.

There were a few contributing factors that i wont go into but at the end of the day when going to work feels like a chore and not fun anymore then decisions have to be made. I found that i had lost the passion i had when i opened 5 years ago and that business pressure was increasing with all outside factors such as fuel prices & interest rates earlier in the year and now the global collapse, all which indirectly affect small business. Also the fact that my landlord felt fit to increase my rent 40% on my first renuwal after he new i was settled and established.

At the end of the day i was working to pay bills, and felt guilty when id spend a bit of cash on the car.

Going to work early and coming home late also has meant i have missed spending time with my young family which i will now have the opportunity to do.

Thanks again to all of you who trusted me to work on your cars and supported me in my business.

The good thing is now ill have more time to spend on my own car and hopefully get to some events to enjoy it with the rest of you guys.

Cheers Stuart.

PS Chevys Rule lol...

well it's always sad to see another shop go down. but it sounds like you've made the right choice for you mate. :D best of luck with whatever you are up to next. :D

looks like I'll have to check out the yellow peril at an event instead of the shop, but that's even better. :D

Hey man,

Not good to hear that Bezerkly has now closed.

Any chance though, you could post up what things are actually needed to make this fit exactly?

From what I read on another thread, it's new engine mounts, notching the cross member, gearbox mounts, and a new clutch master, plus the electrics, piping, and custom exhaust etc...

Anything else you can enlighten me on?

depends on what you are fitting it in....

in a 32 it required engine mount brackets on the block to be fabricated, clutch master is off a 33, i ran a VL manual steering rack, but guys reckon you can leave the standard one, but i think its to tight, cross member is untouched. fabricated a gbox crossmember for the tremec, can leave standard radiator. exhaust, wiring etc goes without saying. All has been detailed with pics in this thread.

If you plan on street registering this car i would talk to an engineer first.

Hey man,

Not good to hear that Bezerkly has now closed.

Any chance though, you could post up what things are actually needed to make this fit exactly?

From what I read on another thread, it's new engine mounts, notching the cross member, gearbox mounts, and a new clutch master, plus the electrics, piping, and custom exhaust etc...

Anything else you can enlighten me on?

Cheers Baron, make sure you let me know when your in town..

well it's always sad to see another shop go down. but it sounds like you've made the right choice for you mate. :) best of luck with whatever you are up to next. :P

looks like I'll have to check out the yellow peril at an event instead of the shop, but that's even better. :)

ordered my trick mufflers from gonzo today, in QLD next week so will pick them up then, ill post pics when i get them as they are different from mufflers most of you would have seen.

so planning on getting exhaust, tin-work & a few things in engine bay like breather can and overflow made. want to run car at that 6 hour at wakefield in march so have a deadline now. also need to tune car , set wheel alignment and suspension set-up and find a rear screen.

I've been reading this thread for a while now (blardy interesting!) and it's a shame to see the shop go. It seems you have made the right choice for yourself though, so that's good :)

Can't wait to see this thing finished and rolling! :)

  • 2 weeks later...

OK, after a week of perfect weather in QLD on holidays i took the oportunity to pick up my hand built mufflers from Gonzo, who is the exhaust guru. These are his new trick mufflers, and like i said they are nothing like you would have seen before. They are 3" merged into twin 3" pipes but with the spiral vortex baffles welded inside. They excellerate gas flow while muffeling sound.

Gonzo also had a software programe on his PC which after entering some engine specs gave us the ideal collector diameter, merge collector area and ideal dinstance from collectors to merge collector.

All of this aids in throttle responce, torque and peak power. Hope to have car back soon to fabricate exhaust and other tin-work etc.

post-20078-1232281977_thumb.jpg

post-20078-1232282051_thumb.jpg

post-20078-1232282116_thumb.jpg

ha, ha, they werent as much as you might think, payed $320each. Also bought all the flange plates, mandrel bends, hanger brackets and some straight pipe. whole system will owe me about $1700 including the extractors and HPC coating.

how many thousand did that set you back?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...