Jump to content
SAU Community

Recommended Posts

Mate I'm still drooling waiting for this thing to be done!

I've been told from a reliable source and someone who's actually done some testing, that the std R32 GTR wing coupled with the Nismo lip spoiler actually does make a measurable difference btw....

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

the electrician was almost done, he reckons we should be able to fire it on saturday.

ill post some pics up. he had done engine bay, dash, and battery cable, relay and fuse box, was finishing powering up the ecu yesterday. might have to modify one harness for the tps switch and iac valve once new intake arrives as we are not sure where they are located. job is tidy, definately not autosalon quality but fuctional and easy to follow.

Mate I'm still drooling waiting for this thing to be done!

I've been told from a reliable source and someone who's actually done some testing, that the std R32 GTR wing coupled with the Nismo lip spoiler actually does make a measurable difference btw....

i wish it was as easy as just throwing the engine cover in there lol. been fun though. worst part is waiting for other people.

Always an excuse Stuart!

Mate, I started the engine swap into mine yesterday arvo.... she'll all in and running, was skiddin her up this arvo :rolleyes:

n836354571_2108060_5322.jpg

got car back today, wired and ready to start. Going to crank it for oil pressure later on tonight.

Still have to fit intake in order to fire it.

Took some pictures of ecu, fuse block and relay block. all fairly basic, mounted on passenger side floor.

once the car is running i will be able to cut some more of the chevy engine harness out as it is for the BCM and not necessary. Like mentioned earlier it is tidy and functional but not show quality. But at the end of the day its a track car. i might spend some time pinning the harness up later, once we know it all works.

post-20078-1234774688_thumb.jpg

post-20078-1234774768_thumb.jpg

post-20078-1234774840_thumb.jpg

post-20078-1234774923_thumb.jpg

post-20078-1234775010_thumb.jpg

post-20078-1234775100_thumb.jpg

lets not get excited, this could go pear shaped quickly. i guess once its running we can see if the decision was a good one. Riskings GTR carnage thread has given me hope lol. i guess they all look the same once they are busted up.

Looking good. I sometimes think I should've put an LS1 in my car...

nah, unfortunately didnt get much done. just made it a home in my garage, havent had it home before so spent most of the night organising the garage.

Everything go alright last night Stuart?

Not long now! :)

Looking great!

And with the wiring, the important thing is that it works... And anything is better than the origional wiring...

I am going to get my car from my cage builder this weekend, so I can finally work on the car again...

Good luck with the start up of the engine! :(

i bought one from JS Auto Imports, Unfortunately i didnt get to use it as it turned up after the car was painted. Risking bought it off me. It was well made. Not sure of the weight improvement. youll have to ask him.

Bootlid? I need a light weight one but cant find one...details my son, details ? :)
Bootlid? I need a light weight one but cant find one...details my son, details ? :P

There's a bunch of 'glass ones around, but no lighter than stock from what I can gain from those selling them.

I removed the hinges and torsion bars (approx 3.5kg), cut out the support reo underneath up to the area where it meets the boot seal (approx 2.2kg), but kept the centre reo from the boot latch to the leading edge of the bootlid.

Then, pinned the front down, and used the original latch to hold down the back, mainly because with the spoilers on using two pins for the back would be difficult, and I couldn't be stuffed tryin to source T-handle spring latches. The cable will still unlock it, but I'm using a spare key Jinkai'd into place permanently in the boot lock as without the torsion bar spring tension the boot doesn't really "pop" open.

22022009.jpg

21022009.jpg

** sorry for the highjack, just wanted to show Roy.....

  • 2 weeks later...

soon mate, i have a friend coming around to upload a VY Commodore tune into it and adjust injector trim to suit the 42pounders. Also has to eliminate the anti-theft security stuff.

Once that is done it should be good to go. I have had a small set-back with the intake but should get it today. It still may require milling as the heads and block have been. Will trial fit it and mill if necessary. Obviously ensuring the port matching is perfect is important on a NA engine. Then some plumbing to the new fuel rails. In a perfect world that should happen this week-end, but we know how things go.

How are the car going?

Got it started yet? Still waiting for videos of the car running.. need some inspiration for my car... :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...