Jump to content
SAU Community

Recommended Posts

Found this on OzHonda; (http://www.ozhonda.com/forum/showthread.php?t=76263)

you have a Telstra network phone you can track where your car is for 55 cents per location check.

It is called "Whereis everyone". To set up it sends an SMS to the other phone. If they agree to the tracking you can continue to see where the other phone is on a sensis map for 55 cents. It is surprisingly accurate! Try it yourself.

I have found it finds others to within a street away - and it shows a pin point on the map where it calculates the phone to be.

I think it is more designed for teenie boppers to find each other when they go nightclubbing but it is also a very cheap car tracking option!

How? Put an old mobile phone in your car with a cheap $5 plan etc - (leave it on all the time) and if the car is stolen you can find your car! (well its approximate location - but like I said it narrows it down to within a street or two on a map). Sometimes better - it finds my house to about 50 metres.

Not as good as sat nav tracking devices but it is better than nothing and ghetto cheap!

The phone you are using to view the maps obviously needs to be good enough to access mobile internet but the phone you are tracking can be old school 10 years old - it doesn't matter at the tracked end.

Just be warned - if you do see your car outside some crook's house - go to the police - don't confront the thief yourself..

http://whereismobile.com.au/

http://whereismobile.com/features.php

and a video;

http://www.locatrix.com/pages/posts/wherei...australia11.php

Link to comment
https://www.sau.com.au/forums/topic/188469-tracking-car-with-phone/
Share on other sites

that and get a little sticker like the intel one that says satellite tracking inside :) I know it detracts from the look of the car etc but having that installed wont stop a thief but having that installed and a sticker to say the car is tracked might deter the thief in the first place.

  • 2 months later...

Two very interesting DIY projects that show promise...

a) http://forums.performanceforums.com/forums...t-67142833.html

PIC16F876 connected to a 5110, and a GPS

b) http://cgi.ebay.com.au/YOU-CAN-BUILD-YOUR-...1QQcmdZViewItem

Search for "real time GPS tracking system" if link is down and look for the "digital download" result.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...