Jump to content
SAU Community

Godzilla Motorsport 8.40 At 162mph

markr34gtr

By markr34gtr,
in Motorsport Discussion & Builds

 Share

Recommended Posts

R33draggtst Contributor

R33draggtst

Posted
Posted

Fantastic time mate - well done to all involved :)

what was the 60ft time? - any vids?

last night at willowbank ran 8.404 at 162.5 mph on slicks... 2nd run of the night.

the first run was a bit of a test run then all went well 2nd pass..

big thanks to all who helped out..

cant wait for a preped track...

cheers, mark

2rismo Grand Master

2rismo

Posted
Posted

Well done mate. 8.40 is an awesome time for any full weight GTR. Forget the prepped track, I can't wait to see what the car does with some boost in it and some weight out of it!!!

Top stuff!

Adrian

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
sorry for the silly question...but what defines full weight in drag circles?

Congrats on the time Marks that is awesome!

+ or - 100kg from standard

well done mate on the time...getting close to the quickest outright in Aust now

markr34gtr Experienced

markr34gtr

Posted
  • Author
Posted

thanks guys... all going well we have a new goal. little diet and 6 to 8 more psi boost and just maybe australias first 7 sec 4wd gtr. the re run of jambo could be the go...

prob need to loose 200lbs and run 170mph with about 1200 to 1250hp to run a 7.99 et...

must be close to being fastest 2.6ltr in the world as it is now....

we run std 86mm bore with std stroke crank...

cheers. mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...