Jump to content
SAU Community

Recommended Posts

before you pay $790 for that set get a price for Hankook Ventus K104... same price awesome tyre, far superior to Nankang without doubt cant comment with Fedral never tried them. The Ventus K104 is the shitz ..... 235/40/17 for $190 each and Im using R34GTT mags

edit: ahh 18's my bad. hhmm price the K104's anyway =D

I've got 595 0n 17's. Wear is OK. 33k at present, on the rears. Got about another 5k . Cant tell about the fronts, as a dodgy tie rod end scrubbed them

out.

I find them a bit noisy though.

before you pay $790 for that set get a price for Hankook Ventus K104... same price awesome tyre, far superior to Nankang without doubt cant comment with Fedral never tried them. The Ventus K104 is the shitz ..... 235/40/17 for $190 each and Im using R34GTT mags

edit: ahh 18's my bad. hhmm price the K104's anyway =D

K104's FTW!

before you pay $790 for that set get a price for Hankook Ventus K104... same price awesome tyre, far superior to Nankang without doubt cant comment with Fedral never tried them. The Ventus K104 is the shitz ..... 235/40/17 for $190 each and Im using R34GTT mags

edit: ahh 18's my bad. hhmm price the K104's anyway =D

I put K104's on my car and while I haven't had any traction issues I find the fronts are a bit funny with off centre feel. Maybe I was just spoiled with the Dunlop Formula W10's that were on my car when I bought it... they were clearly a few years old and but it felt like the front end was glued to the road. F*ck they were noisy though.

had federals on my stagea when i got it and they were lucky to last 30,000klms. they are crap and if you really want a decent tyre go for michelin all the way.

i switched and man what a difference in ride, so much smoother and quiet to boot!!!

just my 2 cents

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
    • lol the 2nd one boss, thank you for pointing this out. I feel as i spend more time here this intro message is some thing i will always make me laugh and shake my head at. Perfect Intro:  I have the vehicle  
    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
×
×
  • Create New...