Jump to content
SAU Community

Recommended Posts

I spotted a 4door 32 on bruce highway heading north last night with personalised number plates (of which i cant remember), they had bright lights! I was driving a silver 33 with dints :laugh: I went nambour exit and they went maroochydore!

Also spotted red_emblem's r33 in mooloolaba last night! Not sure if he still ownes it though.

Edited by BLiNKsTaR

Had a yellow 34 behind me on the Gateway tonight..

Saw a 4 door 33, plates "DET 33"...get your rear tail lights fixed or else you're gonna have someone crash into your ass real soon.

Edited by so_tred

skylines in innisfail

white 33 s2 with a frontmount

white 33 s1 with white wheels

maroon 33 with frontmount

silver 4 door 33 standard looking

black 33 reportedly modded quite extensivly

havent seen it myself but theres also apparently a 32 gtr here

anyone use these forums and around the cairns/coral coast area?

skylines in innisfail

white 33 s2 with a frontmount

white 33 s1 with white wheels

maroon 33 with frontmount

silver 4 door 33 standard looking

black 33 reportedly modded quite extensivly

havent seen it myself but theres also apparently a 32 gtr here

anyone use these forums and around the cairns/coral coast area?

Yep..... Cairns....

Seen a heap of 'lines up here.....

but saw a really nice black R32 @430 the other morning and a sweet white R32 4door..... One nice looking ride :laugh:

Hey,

Just wondering if the Silver R33 Skyline with a full bodykit that beeped at my white R34 Sedan last night in runaway bay was a member of this club? Would be nice to find out the members that are geographically closest to me ;)

Hey,

Just wondering if the Silver R33 Skyline with a full bodykit that beeped at my white R34 Sedan last night in runaway bay was a member of this club? Would be nice to find out the members that are geographically closest to me ;)

Hey Champ.

This post should be posted in the spotted thread located here

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...