Jump to content
SAU Community

Recommended Posts

spotted new gtr yesterday in southport mall bluey grey?

i was looking at his and he was looking at mine(no homo) :ermm:

wonder if he wanted to swap?

Well he should have bought a real Skyline in the first place then.

Spotted a silver 4 door 33 today in Hawdon St, Windsor/The Grange, and a black 34 with a white front bar drove past me while I was walking up Kedron Brook Rd.

Also a white 32 this morning sitting next to me in traffic on Webster Road... think I may have seen that car last Friday as well.

To the wanker P plater in the silver R34 this evening coming through Bracken Ridge onto the gateway highway.

I was not attempting to race you, i was running late for a function and was trying to get there on time, so racing up and then getting infront of me coming onto the highway was not you winning, also the half-arsed clutch kick on the on-ramp to the highway was not only pathetic but was also insanely stupid thing to do.

WARNING

to anyone in an skyline/ import around the broad beach area

there is a fat c/nt in a gold v8 statesman vt/vx model?

that likes to try to run you off the road im not sure why?

he sat on my arse for bout 1km then tried to pull up beside and merge into side

of me i booted it leaving him standing and turned then he was there again close enough i could not see his headlights

i pulled off onto the shoulder and he flew by swerving at me then pulled over and jumped out car waving his fists in anger :) as i boosted past :(

this guy is clearly a fu*ing idiot

he is a big fat terd wearing a blue collared work shirt very similar to a cabbie or bus drivers shirt

if you see him up your arse just get out the way

he does not appear to give a shit about his car or anyone Else's

if i did not have my wife in the car

this would of ended differently

:huh:

WARNING

to anyone in an skyline/ import around the broad beach area

there is a fat c/nt in a gold v8 statesman vt/vx model?

that likes to try to run you off the road im not sure why?

he sat on my arse for bout 1km then tried to pull up beside and merge into side

of me i booted it leaving him standing and turned then he was there again close enough i could not see his headlights

i pulled off onto the shoulder and he flew by swerving at me then pulled over and jumped out car waving his fists in anger :) as i boosted past :(

this guy is clearly a fu*ing idiot

he is a big fat terd wearing a blue collared work shirt very similar to a cabbie or bus drivers shirt

if you see him up your arse just get out the way

he does not appear to give a shit about his car or anyone Else's

if i did not have my wife in the car

this would of ended differently

:huh:

Simply pull over if it gets too much, call the police, take note of his number plates.

What you do (boot in anger) and he does can cause serious accidents.

There is every type of person out there, just need to not be sucked into the wrong crap.

Simply pull over if it gets too much, call the police, take note of his number plates.

What you do (boot in anger) and he does can cause serious accidents.

There is every type of person out there, just need to not be sucked into the wrong crap.

yeah true

i only give it a boot to get away from the co&khead

ive only the had the skyline bout 2 months

still getting used to all the retards i guess

:P

I still haven't been spotted by anyone outside of our group :ermm:

I've spotted you a few times. There's a few others like yours that get around these parts. I saw one a while ago at the subway in albany creek, getting import checked with a late series FD

Hey,i'm on holidays up here at the mom,keep seeing a suncorp add on tv,is the car at the start of the add a 35 r ?. looks like it to me. :blink:

is it the one with the voice control and he is saying "step on it", etc and it keeps repeating the wrong thing? if so, then yes that is a r35 gtr.

next to a white 32gtr (was in my blue 32gtr)

on old cleveland rd coorparoo arount 9 pm or so near mcdonalds

It had close to mexican offset but was very cool

as usual the driver wouldent look at me (might have been searching for the lastest fixie bike?)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...