Jump to content
SAU Community

Recommended Posts

Spotted 2 silver v35's within 2-3min of each other on moggill rd bellbowrie/kenmore at 2.30pm today they had the same bodykits too.

Then at 3pm I seen a black r33 at the toowong shopping centre

hes a mechanic so he got his boss to apply for it lucky bastard haha

Yup I know mechanics who get excemptions for that reason too but hate to say it is only between work hours. There is the" only car in the household" line I have heard as well. Thing is will only get grief if he acts like an idiot.

Yeh he swaps cars on the weekend but he goes on his opens in a month so close till less hassel haha

Yup I know mechanics who get excemptions for that reason too but hate to say it is only between work hours. There is the" only car in the household" line I have heard as well. Thing is will only get grief if he acts like an idiot.

Yeh he swaps cars on the weekend but he goes on his opens in a month so close till less hassel haha

I had the exemption all through my Ps, 5am-11pm 7 days a week.

"hardship" and "only car available"

passed a black 33 4 door in cooroy about 5:30 this arvo. looked fkn stupid. stupid "hella flush" offset with the rear tyres sticking out past the guards, and a different offset to the front. just looked like he walked into a tyre shop and bought 2 different pairs of wheels without checking the offset.

anyone know the blue r34 with stupid looking chrome grill (looks like it's off a late model commodore)? it's getting around gympie at the moment. saw him with the bonnet up getting boned by the cops today. had a laugh

Yay!!! Spotted at last!! Only took nearly 8 years!!!

Still don't understand... was I parked or were you when you saw me???

lol... 8 years... :|

I was driving past the aldi/pub/fruit market on blunder road.

Your car was parked out on blunder... Looked like you was out for some vegie groceries or something along those lines.

/\

That's me!

Hi, was that you leave a SAU QLD card on my windscreen the other day? My car was park at Brisbane Convention Center!! If yes my name is Alfred nice to meet you, you have a really clean ER34!!!

anyone know the blue r34 with stupid looking chrome grill (looks like it's off a late model commodore)? it's getting around gympie at the moment. saw him with the bonnet up getting boned by the cops today. had a laugh

That's the one that was broken down outside work. It's a 33 with a dodgy 34 front conversion.

First time I saw it, I thought it was an Accord, yucky.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...