Jump to content
SAU Community

Recommended Posts

Welllll I just saw squizza old cefiro, 3 streets from my house, and then just down at 'da plaza' I saw SHY 32, but I liked it better with the black stockos on it, not the chrome :D.  Crazy I say whats going on with browns plains!  cause there is a nice R33 GTR just up the road too... and a bright green R34 sedan.

Browns Plains is getting huge now, plenty of skylines around...who else on here is from Browns Plains?

Browns Plains is getting huge now, plenty of skylines around...who else on here is from Browns Plains?

It feels like ages since i have been to BP. I might be up that way on the weekend.

Welllll I just saw squizza old cefiro, 3 streets from my house, and then just down at 'da plaza' I saw SHY 32, but I liked it better with the black stockos on it, not the chrome . Crazy I say whats going on with browns plains! cause there is a nice R33 GTR just up the road too... and a bright green R34 sedan.

the black stockos should be good skid wheels :D

was the 33 GTR purple? If so then its brett's (klayman)

there used to be wikid grey 32 getting about the stains, but it think it moved to the coast earlier in the year ;)

It feels like ages since i have been to BP.  I might be up that way on the weekend.

the black stockos should be good skid wheels :)

was the 33 GTR purple? If so then its brett's (klayman)

there used to be wikid grey 32 getting about the stains, but it think it moved to the coast earlier in the year ;)

yeh that grey one was siiiik!! :mad:

Zoix - where's bouts is wakerley?...

Saw a silver R33 GTS25T on browns plains rd today bout 4 ish...plates 688HJU.....has the www.skylinesaustralia.com sticker on the back window......no where near centered tho.....

wastes the look of both the 'line AND the sticker

OK Spotted:

Friday night Red 4 door R32 plates were RED32 at Beenleigh Marketplace ~7:15pm

Saturday Morning:

Black R33 Southbound on M1 ~Waitland Street exit (I was nothrbound) ~7:15am

Sliver R33 S2 (Owned was this you looked exactly like your car) Again it was taking the 8 mile plains exit southbound on Gateway (Just before it meets the SE Freeway) ~7:30am

Gunmetal Grey R32 Northbound Bruce Highway between Deception Bay Exit and Burpengary Exit Plates were WIK32 hot HOT chick with white blonde hair, did not even look just stared forward when I waved, not even a glance so she prolly didnt even notice me :) ~8:00am

Wine Red 33 Northbound on gateway just after the first onramp after bridge ~11:30am I was southbound.

End of Report :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...