Jump to content
SAU Community

Recommended Posts

With all the recent thefts in sydney, i thought id post up some simple methods to hopefully save your skyline!!!

1. Comprehensive Insurance - I know not everyone can afford this but its definately worth it with the stealing going on.....

2. Good alarm, im not talking the dodgey non black wired one that came with the car from japan, a good 2-3 point immob, loud siren and internal screamer...pager alarms are also a bonus!

3. Clublock + Window Tinting + Sun Shades!! - this is a strong visual deterrant, takes time for the thieves and is a pain in the ass + it makes looking inside the car much harder, as most skylines can get away with 5% tint and a sunshade on the front window makes it impossible to see inside the car!!

4. Kill switch, weather it be on your ignition source, or fuel pump power.. it would cost all of $5, mount it in a custom place, under dash, glovebox, under seat, under ashtray, in door, centre console, passengers side - pretty much something that will disable the car even if you try and start it with a key, its so simple and easy to install, do it properly, hide the wires, put the switch somewhere where no one would look, (this is also a good way of playing a trick on a mate, give him the keys and tell him to go for a drive... goodluck in starting it though!)

5. remove an engine component, coilpack ignitor, unplug afm, anything that will stop the car from running or running properly...

6. Think about your parking, park somewhere that people are, near an entrance to a Mall, near a resturant... not in a dark corner or alleyway...

7. Add an internal screamer to your alarm, yes hook it up to your normal screamer outside the car, paint it black, put it under the dash... i did an install in a car and added this, 120db inside a car is not pleasant.. i found it unbearable to sit in the car with it going off, there was no chance in hell of sticking my head under the dash where the actual alarm was... this would cost all of $30 from tandy or dse and is simple to install...

8. Any valuables or headunits or gauges or whatever, hide them or mount them in non obvious look at me fully sick places... if you can see them from outside the car, then someone will want them...

9. Steering wheel direction + Parking attitude, if all of the above fail then your car might be stuck onto a tilt tray, turn your wheels towards a kerb, get a mate to park you in, previously ive parked a trailer in the corner of a carpark with a motorbike on it and a car diagionally across the front of it to secure it... aint no one moving that torana to get to the commodore to move the gemini to steal the falcon..

10. A tracking device, not everyone can afford quiktrack but for about $400 you can get a tracking device that uses a simcard and the mobile phone network... you can track it online, up to a few seconds & m of where the car is, cheaper than alot of options and you can pinpoint the car!!!

If this fails, makesure you have people in the "KNOW" to track your ride down no questions asked... but not everyone has that bonus.. :<

I hope that I can atleast save one car, if anyone has anymore questions or needs someone to install any of the above into their prized posessions let me know, some are simple but ill also put you intouch with some trusted and qualified installers... otherwise ill work for beer!

If anyone has anymore pointers stick em down!

This thread bought to you by HAYSEY SECURITY CO

Thanks

Link to comment
https://www.sau.com.au/forums/topic/193828-save-your-skyline-10-simple-steps/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Put kill switches under the carpet somewhere, preferably where it's not going to stand out as a lump and anyone looking at you starting the car isn't going to think you're up to anything unusual.

Ultimately there isn't any real way of stopping someone from stealing something they really want, however the longer you delay them, the more panicking and chance they'll bail if look like they're going to get caught, 'cause the only thing they really don't want is to be pounded in prison more than your car.

I'm starting work on an internal screamer system, once it's worked out I'll chuck it in the fabrication forum.

I'm aiming for 150db and under $200 with it's own backup battery... yeah, I want permanent injuries from this bitch :P

Screw a screamer, ill just leave my sound system on.. close or over 110db and at full blast with the four seasons on. will scare me shitless when i get back in tho :S lol

Good thread someone needed to make it with all of the missing cars. Hopefully mine is still parked when I walk back to it

Nice write up dude.

Now come over and do all that stuff on my car :P

Like i said bro, you saw my car, i did alot o f the above to my car so feel free to bring it over and ill slap some more security on..... just bring some more bundys!

I do try, hopefully i help.... feel free to sticky it!

ADDING ANOTHER POINT - Use you old address when rego your vehicle, don't ever let anyone in RTA know where it's registered. Like I said in the other thread, you never know how many dodgy c**ts are in there searching through the database and giving them away to crims for $50 a pop.

ADDING ANOTHER POINT - Use you old address when rego your vehicle, don't ever let anyone in RTA know where it's registered. Like I said in the other thread, you never know how many dodgy c**ts are in there searching through the database and giving them away to crims for $50 a pop.

can you explain this point a bit more champ? what if they send you a letter?

can you explain this point a bit more champ? what if they send you a letter?

Yeah, it doesn't work so well when you have fines that are 6 months over due because you don't know about them, you drive a modified import, and a friendly Highway patrol officer decides to run a random check while following you down the freeway.......

ADDING ANOTHER POINT - Use you old address when rego your vehicle, don't ever let anyone in RTA know where it's registered. Like I said in the other thread, you never know how many dodgy c**ts are in there searching through the database and giving them away to crims for $50 a pop.

yeah thats a crappy idea.

a good idea is to pm me with where you put your kill switches. ill eventually let you know if they are effective.

nice write up Ed, hows the beast????

i like to put 2 kill switches in series in different places makes it 2wice as hard to find them both to start the thing.. also if they find one the car wont start and yeh again they wont be looking for another switch once they find the first :) i mean if you put it under the dash somewhere, which most people do coz of reachability, then it will be easy to find... hence have two!!!

i didnt read all the replies....

but ffs buy an r31 as a daily and leave the "insert GT whatever skyline here" in your LUG with all the advice Ed posted :)

And remember, LUG, not a communal, carport, carspace, LOCK UP GARAGE!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...