Jump to content
SAU Community

Recommended Posts

  • Replies 153
  • Created
  • Last Reply

Top Posters In This Topic

Wow I can't believe your putting NOS in. I doubt it will make 200kw...well not at the wheels anyway.

The bad thing about some NOS systems is they're not progressive and come on too strongly, 75hp sounds alright.

If you insist on staying N/A and not going FI, bang for your buck - cams and power fc ... it would make the engine much more elastic in the rev range, might lose a bit of bottom end depending on what cams you going.

Little concerned about the placment of the NOS jet Cara, being in only one side of the two intakes you may not get an even distribution to all cylinders. As a general rule of thumb they should always be at least 6 to 8 inches before the throttle body for an even distribution to all cylinders.

I was at High tech dyno today fiddling with the fueling on the dyno as my tune was alittle too rich, just on idle chatter about various cars with one of the tuners, your atmo Nitrous+PFC subject came up and coincidentally I see the topic here today.

Very interesting to say the least, good luck with everything :)

true but go race a turbod car. :)

See how it goes.

why? i don't like the smug tone of your post.

race your car against an F430, see how it goes.

this is the naturally aspirated section and more specifically cara's thread about her nitrous progress... please keep it on topic.

why? i don't like the smug tone of your post.

race your car against an F430, see how it goes.

this is the naturally aspirated section and more specifically cara's thread about her nitrous progress... please keep it on topic.

You got the wrong tone.

I'm pretty sure i read clearly that this is the NA section also, what this thread is on.

I'd be more than happy to go up against a F430. Wouldn't you want to try?

Have i said something off topic? I was just saying to take it against a turbod car and see how the nos goes.

I wasn't saying, that this idea was stupid and that putting it up against a turbo it still would have no chance.

Geez.

if that's the case then i take back my comment and offer my apologies.

very often we get people in here who preach 'turbo'. reading your post in different light, i agree - that would be a test to try out. however where do you draw the line in terms of comparison? same power output or same amout of money spent?

with what you said, going head to head with a mild GTSt/GTT would be evenly matched - driver pending.

CARA!

YOU SAID YOU WONT BE STINGY ON THE PICS!

:nyaanyaa:

Hows she go?

agree with john. i think 3 & 4 would get a larger amount of nitrous than the others.

direct port injection :w00t:

I dont think so.. The pistons cause vacume and hence suction at different times.. the valves will be open to allow the piston to create suction and taking in the bulk of the NOS. Because not all 6 cyl's are creating suction at the same time ther isnt much "comptetiton" from others. Residue may be left near cylinders 3 and 4. But they wont be getting significantly more NOS than the others..

Not sure if this makes sence.. cos I have a feeling it dosnt..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...