Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: Skyline GTR R32

Milage: 87 000

Transmission: OS Giken 5 speed

Colour: Spark Silver

Location: Newcastle

Complied? Yes

RWC supplied? Yes

Currently registered? Yes NSW 12 months

Price: $59 000

Contact: via pm

Comments / Modifications: extensively modified... see list

Images:

http://www.skylinesaustralia.com/forums/up..._772_146787.jpg

http://www.skylinesaustralia.com/forums/up...2_772_90212.jpg

Modifications...

Body.

Full ANDRA approved Cro-moly 6 point roll cage

Bodyform N1 style sideskirts

Top Secret rear underbody diffuser

Gannador aero mirrors

Garage saurus front lower lip

N1 front bar nostrils

Carbon fibre bonnet lip

D-speed clear indicators

clear side winkers

Full Spark Silver respray inside and out, including engine bay

Bodyform body striping

Interior.

Bride Zeta III FIA approved full bucket racing seat

Bride Brix II recliner passenger seat

Bride genuine rails (driver and passenger)

Willians 3 inch drivers harness

Willians 2 inch passenger harness

Carbon fibre rear interior trims

Carbon fibre console panel

Scuderia Racing 0-300kmh speedo

Autometer NOS gauge

Autometer boost gauge

Autometer warning light (low oil pressure)

Nitrous and line locker controls

Electronics.

Apexi Power FC ECU

HKS twin power ignition

Splitfire ignition coils

New Z32 air flow meters

Blitz ID3 boost controller

Blitz ID3 power meter

G-Tech PRO RR with laptop interface, software etc

Carel inlet temp meter (fully programmable switching outputs)

DiRTgarage 2wd/4wd switch loom

Driveline.

Cusco 1.0 way front LSD

Trust enlarged front diff cover

NPC twin plate custom race clutch (1000hp)

OS Giken 5 speed gearbox with upgraded input shaft

C's short shifter

Nismo gearbox mount

Nismo 2.0 way mechanical rear LSD

braided hydraulic clutch line

Full race line locker kit

Engine. (engine build by Croydon racing)

Block acid dipped, crack tested, deburred and specially modified for racing

Nissan new R33 crank race prepped by Croydon Racing (crossdrilled, grub screwed etc)

JUN conrods

JUN cosworth pistons

JUN rings

JUN oil pump

JUN conrod bolts

JUN main studs

Block drilled and tapped for 1/2 inch head studs

ATI race harmonic balancer

Performance metalcraft 9 litre race sump (swing gated baffles etc)

Tomei oil restrictor

Nismo engine mounts

Head. (head work performed and/or overseen by Croydon Racing)

Trust DRAG head gasket

Full race porting

Galleries enlarged and grub screwed

head machined for camshaft lobe reliefs

1mm oversize valves

bronze guides

JUN titanium retainers

JUN valve springs

JUN race cams (size and duration available to purchaser)

JUN cam cap studs

ARP 1/2 inch head studs

Tomei race buckets

Tomei valve shims

Tomei collets

Tomei inlet and exhaust gasket kit

Mines cam cover baffle kit

OS Giken cam gears

Trust timing belt

Turbo's.

HKS GT-RS turbo's (modified by Croydon racing)

Turbine housings coated in Hi-temp black ceramic coating

Compressor covers coated in Cerami-chrome ceramic coating

turbine housings ported and matched to manifolds and dumps

HKS 1.2 bar wastegates

HKS stainless manifolds Hi-temp black coated and ported and matched to head

HKS stainless dump pipes Hi-temp black coated and ported for increased gas flow

all turbo oil and water lines replaced with earls braided lines and fittings

Exhaust.

Trust front pipes (heat wrapped)

Trust full 4inch race system RO

Suspension.

HKS hyperdamper circuit coilovers

JIC rear upper camber arms

Nismo full rear arm kit (lower control arm, traction arms etc)

Rear sub-frame pineapple bushes

Tein front radius rods

Noltec front upper camber arms

Hicas rear cancel bar

Bracing.

Cusco front tower brace

Cusco rear tower brace

Auto-select front A pillar braces (rare)

Brakes.

Std GTR front brakes

Std GTR rear brakes

braided brake lines

Cusco master cylinder brace

Bendix ultimate pads

Fuel.

Bosch motorsport 040 in-tank swimmer pump

2 x Bosch motorsport 044 external fuel pumps

Performance metalcraft surge tank

custom perspex fuel system enclosure

Sard fuel pressure regulator

Blitz 1000cc injectors

Trust twin entry fuel rail

-6 braided fuel lines and Earls fittings throughout

twin Bosch motorsport fuel filters

Cooling.

Top Secret "super radiator"

Nissan N1 water pump

Trust oil cooler with filter relocator and thermoblock

Hypertune coolant overflow tank

Hypertune coolant header tank system with braided lines and alloy fittings

Gates radiator hoses

Intake.

Hypertune billet plenum with port matched runners

Hypertune 102mm single billet throttle body

Hypertune custom intake and intercooler piping kit

Trust DRAG 160mm twin entry intercooler

Twin Blitz blow off valves

HKS turbo to intercooler piping coated with cerami-chrome

HKS twin intake filters

Wheels and tyres.

Custom black R34 GTR rims with centre caps

Toyo street rubber

Std R32 GTR race rims

Mickey Thompson Street Drag Radials

Misc.

Full NOS 75hp wet nitrous kit including bottle warmer, gauges, brackets, 10lb bottle etc (never been used)

Sard battery box (in boot)

Battery isolation switch (front bar mounted)

Hypertune engine catch cans

UAS alloy radiator air guide plate

DiRTgarage mesh passenger headlight air intake

Engine bay braided hoses and lines

Trophies.

Winner Drag Combat round 1 Sydney Feb. 2004

Winner Sydney Autosalon Dyno challenge Mar. 2004

Winner Drag Combat round 4 Sydney May 2004

Winner Drag Combat National Series Champion May 2004

Runner Up Powercruise Dyno shootout

Winner Newcastle Autosalon Dyno Champion 2005

Winner Newcastle Autosalon Dyno 6 cyl 2005

Winner Newcastle Autosalon "tough as nails" 2005

Winner Newcastle Autosalon "driver with attitude" 2005

Winner Autosalon Final Battle Dyno 6 cyl 2005

Winner Autosalon Final Battle "tough as nails" 2005

Winner Autosalon Final Battle "driver with attitude" 2005

Winner Autosalon Final Battle "the unmistakeable theme" 2005

Winner Newcastle Autosalon Dyno Champion 2007

Winner Newcastle Autosalon Dyno 6 cyl 2007

Winner Newcastle Autosalon Dyno KW/Litre 2007

Winner Newcastle Autosalon "tough as nails" 2007

Winner Autosalon Final Battle "tough as nails" 2007

Media.

Autosalon Magazine Issue 24. 6 page full feature (Stacey)

High Performance Imports Magazine Issue 59. 6 page full feature (Paul)

High Performance Imports Drag Records List 7th position 4WD over 2400cc (Paul)

Extreme Magazine Issue 16 "Girl Torque" two page article (Stacey)

Upcoming full feature Ignition DVD (Paul)

Upcoming full feature High Performance Imports (Paul)

The car has only recently been completed and has ran a string of 9 second passes, it is 60'ing in the low 1.4's which is second only to Mark Jacobsen in Aust. Engine has only been run-in and has done 12 drag runs and dyno tuning. Engine has mostly ran on Sunoco Max NOS fuel $10/litre and only used Motul 300V le mans oil $25/litre. At autosalon on the weekend easily made 500+AWKW with a fairly rich tune and only 25psi. This is the worlds fastest, quickest and most powerful low-mount turbo'd GTR and we are yet to use big boost or nitrous. The car is capable of mid to low 9 second runs once engine and chassis is fully dialled in. Its a no expense spared racecar and can easily be converted to a circuit racer with the addition of some monster brakes. Comes with most std trims, fittings and parts to convert back to a street car. Lots of spares including spare engine block, prepped rods, forged pistons, transfer case etc. The car is street registered in NSW and is an ANDRA log booked car with a current and recent technical inspection. Interested buyers can see this car race at WSID on the 19th May 2008. as this will be the the cars last outing.

Stacey and i have decided to sell the car due to the fact we can no longer enjoy racing the car together due to our new baby (drag strips are not the place for little ones ears) Recent meetings have not been as enjoyable for me as Stacey was not able to attend. Will consider swap plus cash for mint Australian delivered R32 GTR, Stagea 260RS or straight swap for tidy R34 GTR

Link to comment
https://www.sau.com.au/forums/topic/196438-9-sec-gtr-racestreet-car/
Share on other sites

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

the last time i saw your car at CRD was when i was having mine dyno'd with the same turbo setup (HKS GTRS).

this car has evolved somewhat from what i remember & WHAT A BEAST!!!

nothing to spend - all the hardwork & investment has been done!

beautiful car which has been tuned & built by the best workshop in nsw, CRD.

is this TWO-O6L?

Edited by Marko R1
Hi Paul, Hi Stace!

What a sad day for you guys - big decission to make.

Its nice to leave the drag scene on a good note though :)

I think the price is reasonable for the sale too.

Dave.

Thanks Dave, yes not an easy decision but one that had to be made.

Time with my young family is more important than anything achieved trackside.

Very hard to put a price on the car as the man hours to develop such a car is countless. Its not just a matter of raiding the Japanese parts catalogue bolting it all together and going fast. There is only a handfull of us in the country that have gone sub 10 and most will attest to the massive budget required to do so. This is a great opportunity for someone to take this car over at reasonable cost and enjoy what its like to campaign a truely awesome racecar.

Maximum respect for all the achievements this car has done.

Especially for pushing aside the widely accepted misconception that only a Large single top mount turbo is the configuration best suited for high 1/4 mile results.

You are deff pioneers and are a true asset to the skyline community.

Regards

Rob

Wow Paul...

What a bargain price too. I hope the new owner continues the development in Drag racing cause i want to see what shes really got on offer!

Tough decision Paul & Stacey, Goodluck!

woah...Not an easy decision to make, Pauly. But maximum respect for it and what you guys have achieved with this car. $65K is a reasonable price for such a consistent and well packaged car with plenty in reserve for better times.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...