Jump to content
SAU Community

Recommended Posts

Most important advice from me is: experiment and find out what works for you. There are hundreds upon thousands of exercises you can do and most of us don't have the time to concentrate on every part of the body. So pick some well rounded exercises that work all major parts of the body and don't neglect parts like the legs or you will end up looking silly. You can shorten the experimental stage by finding someone with a body type that you would like to have and just adopt their exercise routine - but don't expect to end up looking 100% like them.

Most important advice from me is: experiment and find out what works for you. There are hundreds upon thousands of exercises you can do and most of us don't have the time to concentrate on every part of the body. So pick some well rounded exercises that work all major parts of the body and don't neglect parts like the legs or you will end up looking silly. You can shorten the experimental stage by finding someone with a body type that you would like to have and just adopt their exercise routine - but don't expect to end up looking 100% like them.

100% agree mate.

Go with what works for you, but still, dont leave muscle groups out.

Even if you do a few less exercises on some groups; like i have always had big toned legs, but go figure, HATE doing leg exercises - so i just do the big stuff; squats with the barbell, toe raising (on squat machine) for calves, and leg curl for hams.

A good friend of mine who i go to the gym with on the weekends is built like a brick shithouse (has ben going to the gym for years, ex footballer), does well in every muscle group, very built and toned in the upper body, but has legs like a rake - and he does double the leg exercises and weights i do with leg work.

Everyone is different!

oh, and as no one has mentioned it, here is a very good site for learning some weight exercises.

Click on the muscle groups, and there are tips and pic/vid demonstrations of hundreds of exercises per muscle group.

http://www.muscleandstrength.com/exercises/main.html

:mrt:

+1 ^

i had a bar on my chest with 10kg on it, was doing a warm up set and just lowered it a little bit too far at the end of the set... from then on, if i was in the gym and alone, i use the smith machine for safety.. nothing looks dumber than having 10kg on your chest. haha.

im with birds on the discipline.. i train alone... in my garage... no distractions, no f#&kwits, no judging, no shame.

1 year of gym membership = 1 piece of equipment per year. after 3 years, i have a power rack, olympic bar, ez curl bar, dumbells, 200kg of rubber coated weights, adjustable bench, power tower, heavy bag, speed bag, floor to ceiling bag, nice rubber flooring, and this year i will be purchasing a leg press and some more weights and next year i will be building a proper room for it all to get it out of the garage so i can get some room back for tools and machines.

i worked out at fitness first last year... it was so frustrating being there with the crowds... the groups of testorone filled 21 yr olds, all huddled around the one leg press chatting, laughing, chekcing out the chicks, all doing 4 sets of 20 to look tough.. so annoying.

2 things get me through my workouts... 1. ronny coleman "light weight baby, light weight!" and 2. john cena can bench 250kg.

check out bodybuilding.com for just about everything you want to know, however like all websites, you cant trust everything and have to pick your way through the crap..

rosstraining.com is brilliant also, ross enamit is a genius with some of his little inventions and workout ideas.

cheers

Linton

+1 Also. I also dropped a Bar on my chest except at the time I was lifting 110kg. I blamed the Barbell as on my first set I was able to do a set of 10 but it felt funny. 2nd set the stupid bar spun over in my hands and fell flat on my chest from full arms length. No broken bones but severe internal bruising. I never did Barbell bench press ever again after this.Upon inspection of the bar it wasnt straight,it was a bit like a banana.No wonder the whole bar spun on me. Smith machine or dumbells FTW

Ouch^

Call it compulsive, but after each set I always re-line up the bar evenly across the rests and straighten up / clamp the weights together because I like everything to be as even as possible. That would have been a terrible experience to happen and I can see exactly how that would have happened if the bar was bent. You should have been able to sue the gym or the barbell manufacturer for that...because unless you overloaded the bar they aren't supposed to bend, only flex when you lift it and even then it won't roll over on you. Were you using a thumbs over or a thumbs under grip? I see tons of people using thumbs over and it's just asking for the bar to slip out of their hands.

iv bent a 20kg bar with 300 kgs, looked alright after until i took a few steps back and noticed the bend. lol. They tried to keep in the gym but it was stuffed and couldnt be used for nothing except a trophy.

Ouch^

Call it compulsive, but after each set I always re-line up the bar evenly across the rests and straighten up / clamp the weights together because I like everything to be as even as possible. That would have been a terrible experience to happen and I can see exactly how that would have happened if the bar was bent. You should have been able to sue the gym or the barbell manufacturer for that...because unless you overloaded the bar they aren't supposed to bend, only flex when you lift it and even then it won't roll over on you. Were you using a thumbs over or a thumbs under grip? I see tons of people using thumbs over and it's just asking for the bar to slip out of their hands.

Nothing wrong with being compulsive when personal safety is concerned. Mate it was a terrible experience. Something I wouldnt wish on my worst enemy. To this day I still get images in my mind of it happening, And what would have happened if that bar landed on my Face or head...RIP to me if thats the case. I had a go at the staff of the Gym and the pisspoor excuse was " Why are you trying to lift something that heavy ? " FFS I just did 10 full reps by myself without really pushing too hard. As for the Grip I must admit it was a thumbless grip. I mainly do this because when you really load a Barbell up. The Thumb under tends to Hyperextend the Thumb tendon. However in this scenario I highly doubt I would have been able to stop that weight from moving even if I didnt.

As for the Bar Whenever you are to use a Bar in the Benchpress. Firstly have the Bar sitting without any weights on it. Then turn the bar over a few times whilst looking at the centre of the Barbell. If you see the centre moving then DO NOT use it..

My situation was if you picture the loaded Bar , imagine that the weights were higher than the centre part of the bar. As I lifted out of the rack and brought bar forward to start point. As soon as I stopped bring it forward it spun over and boom.....

iv bent a 20kg bar with 300 kgs, looked alright after until i took a few steps back and noticed the bend. lol. They tried to keep in the gym but it was stuffed and couldnt be used for nothing except a trophy.

What exercise were you doing to lift 300kg?

I agree, a spotter can certainly be beneficial to your training program. But I seldom see it where someone is spotting correctly. Many provide too much assistance IMO and I've never had need for one...you can always dropset until you reach failure as opposed to using a spotter.

Agreed.

i worked out at fitness first last year... it was so frustrating being there with the crowds... the groups of testorone filled 21 yr olds, all huddled around the one leg press chatting, laughing, chekcing out the chicks, all doing 4 sets of 20 to look tough.. so annoying.

Tell me about it, I can barely go to my gym after around 3pm. I go between the hours of 8am and 2pm, rarely being there after midday, which I sometimes even find me being the only person in the gym, the best way to work out haha.

I'm more of a resistance/bodyweight man myself

all the freeweights are usually hogged by all the meatheads at my gym anyway as I only have time to go after work when everyone else packs into the gym

as said before each style has it's own benefits

I'm going for the lean look rather than bulk

I'm in no way kidding myself that I will ever look like him, but my inspiration is the type of body that bruce lee had

MAn thats some dangerous stuff. Didnt hear any discs popping did you ?

Na dude, all good. To be honest, i havent done it again, most i ever lift now is 250kg on the rack. Its one of those things that when u get in the mood, u go a little crazy. We've all been there i think. (must of been the celltech) :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...