Jump to content
SAU Community

Recommended Posts

I might have an overly simplistic view or maybe my desired outcomes are just really easy to achieve because they are minor but for me it's as simple as when I want to gain weight or get bigger I do heavier weights and eat more protien/carbs etc and when I wanna lean off a little or drop weight I do a bit more cardio and cut back a little on the calories and that seems to work fine enough.

If you wanna drop 10kg, what are you doing to achieve it? I'd like to think you've already looked at your diet and tried to cut back on fats/sugars, unnecessary carbs etc, and that you're doing sufficient exercise for your calorie intake. That is, you should have a bit of a calorie deficit.

If you're doing those things, properly, you should be losing weight. If you're not losing weight then you're still eating too much or not exercising enough for what you eat so change it.

I totally agree with this. If someone is on the gear why do they feel they have to lie about it.

Well anabolic steroids are illegal, so those who do choose to take gear would be disinclined to admit their own usage of the drugs as they do not want to incriminate themselves by stating it outright.

Secondly, roids are generally frowned upon amongst the general public and is seen to be taboo to most due to the negative stigma portrayed by the media.

Lastly, for well known figures in the fitness/bodybuilding industry, admitting to steroid use can definitely ruin their chances of getting a sponsorship or even terminate their current sponsorship - once again due to the negative portrayal of steroids in the public.

There are more reasons why but those are the main ones in my opinion.

However, i think you'll find that if you ask the biggest guy in your gym in a private conversation, they will more than likely be open and honest about their steroid use.

I've recently adapted to arching my back with my legs tucked in tight (mimics decline) i.e. using more of the other muscles rather than relying on just shoulders to help you push. Decline you actually use chest, shoulders and tri's a lot more hence why you can lift more.

Don't my first squat session in a while since pissing off my patella tendon....Oh fark I'm screwed after only 1 set, which is 20kg less than last time. So much for all that riding at least helping maintain anything lol. Guess I must be riding the wrong bike amirite?

Don't my first squat session in a while since pissing off my patella tendon....Oh fark I'm screwed after only 1 set, which is 20kg less than last time. So much for all that riding at least helping maintain anything lol. Guess I must be riding the wrong bike amirite?

I've just been to the osteopath after squats aggravated my injury last night (on the right side, not my injured left side). Be careful Troy, it's not worth having a constant injury :(

I've pissed it off a couple of times in the past, just requires rest lol. Think I overdid it on the rest period this time coz I've gotten so into riding I just didn't care for leg day lol...was too sore most days anyway :D

I've pissed it off a couple of times in the past, just requires rest lol. Think I overdid it on the rest period this time coz I've gotten so into riding I just didn't care for leg day lol...was too sore most days anyway :D

ah yeah cool, well good luck with getting back into squats! :)

Has anyone had any success at naturally getting a decent six pack. Over eating 40% Protein; 40% Carb and 20% good fats - plus epic core workouts followed by lean protein shake for no massively appreciable gain. Helpful comment from someone that's done it would be appreciated :) I understand it's eating regime that achieves this result.

Has anyone had any success at naturally getting a decent six pack. Over eating 40% Protein; 40% Carb and 20% good fats - plus epic core workouts followed by lean protein shake for no massively appreciable gain. Helpful comment from someone that's done it would be appreciated :) I understand it's eating regime that achieves this result.

What do you class as an epic core work out?

roughly 45 mins twice a day - plank up, side plank, T-Stabilisation, Fitness ball Atomic Push-ups, fitness ball rollout, Mountain climber, V-Up, Wood Chop with fitness ball, Fitness ball Russian twists both reg and seated, leg raises, penguin crunches, - all sets of three with between 15 and 20 repetitions, others to fail and 2 min ergometer to fail.

If you wanna drop 10kg, what are you doing to achieve it? I'd like to think you've already looked at your diet and tried to cut back on fats/sugars, unnecessary carbs etc, and that you're doing sufficient exercise for your calorie intake. That is, you should have a bit of a calorie deficit.

If you're doing those things, properly, you should be losing weight. If you're not losing weight then you're still eating too much or not exercising enough for what you eat so change it.

My workout over the past few days in this holiday period using all the free time i can

Sunday:

4km Bike Ride in arvo

3.5km walk around the suburbs

3km run on the treadmill at the gym,

added on to that 9km bike to the gym and back

Monday:

3-4km Bike Ride Arvo

4km walk around the suburbs

3km run on the treadmill at the gym,

added on to that 9km bike to the gym and back

Today:

25km bike ride to the inner city Melbourne, taking the train back

3.5 walk around the burbs

planning to gym later biking it and back

Edited by MrClandestine

roughly 45 mins twice a day - plank up, side plank, T-Stabilisation, Fitness ball Atomic Push-ups, fitness ball rollout, Mountain climber, V-Up, Wood Chop with fitness ball, Fitness ball Russian twists both reg and seated, leg raises, penguin crunches, - all sets of three with between 15 and 20 repetitions, others to fail and 2 min ergometer to fail.

That truly is an epic core workout, but it'll do little to get you a six pack...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...