Jump to content
SAU Community

Secondary Bonnet Restraints

R33_Rob

By R33_Rob,
in Motorsport Discussion & Builds

 Share

Recommended Posts

R33_Rob Proficient

R33_Rob

Posted
Posted

Im looking at taking my car out to the track. right now i am performing the neccessary upgrades to ensure i can race.

I saw that i need to have a secondary bonnet restraint. What do you guys use?

I have a standard bonnet and i think i will look like a wanker if i put bonnet pins on it. Anyone got other suggestions?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/201649-secondary-bonnet-restraints/
Share on other sites
gotRICE? Veteran

gotRICE?

Posted
Posted (edited)
Im looking at taking my car out to the track. right now i am performing the neccessary upgrades to ensure i can race.

I saw that i need to have a secondary bonnet restraint. What do you guys use?

I have a standard bonnet and i think i will look like a wanker if i put bonnet pins on it. Anyone got other suggestions?

Cheers

Does it state that its needed for a stock bonnet?

The OEM latch is unlikely to fail, and if it does, the safety catch is also unlikely to fail.. if you see it quick enough.

I wouldnt be worried about a secondary catch for an OEM bonnet. Unless it clearly states it IS required for an OEM bonnet too.

Iv been track racing for years, and the only people i know with pins are those with CF bonnets where the catch isnt bolted to anything structural, IE the fiberglass skeleton.

Also, out of the many many many days i have been to i have NEVER ever seen a bonnet come unlatched or fly open.

The odd muffler fall out the ass, fuel tank straps coming off and blown motors/boxes, even an engine mount bolt working loose and flying out under the car... :D but never a bonnet!

Edited by gotRICE?
MANWHORE Grand Master

MANWHORE

Posted
Posted

I've seen many carbon fibre bonnets come off actually. It's really hilarious to watch (not for the owner of the car though).

They often smash backwards and smash the roof and the windscreen. Sometimes they crack badly and bits of the bonnet flies off.

Adriano Grand Master

Adriano

Posted
Posted

Most of the track days ive scrutineered, a secondary bonnet restraint is necessary. Lots of people hook an old belt from the bonnet frame and clip it down through the bumper or so. Another way is with a small chain and a shackle/caribbina and hook it onto the radiator support.

Duncan Grand Master

Duncan

Posted
Posted

basically it depends on the Supplementary regulations for the event you are entering. If the Supp regs dont say anything you don't need a secondary restraint unless it is full on racing (schedule C requires secondary restraints for non road regstered cars)

Most events dont need a secondary restraint for modern cars

evil_weevil Grand Master

evil_weevil

Posted
Posted

1 question though,

With using a belt or the clips etc, what if theres a fire under the bonnet?

Be a bit hard to get them undone in time?

mind you though if there is a fire Id be out quick smart! but if a small,little fire started?

Ant97GTR Grand Master

Ant97GTR

Posted
Posted

Despite the dual catch system std on modern cars the track days we do with the WRX club here in Vic state you need one. There are lots of ways you can do this.....bonnent pins are fine with a std bonnent, others use a belt strap fitted to a suitable spot and I use a wire cable attached to the frame of my bonnent which hooks to the radiator support.

  • 5 months later...
Beer Baron Grand Master

Beer Baron

Posted
Posted

my advice is buy one of these babies. http://www.initialdrift.com.au/forums/view...074&start=0

cost about $25 and make sure you ask for it to be sheathed with the rubber heatshrink (stops it scratching up stuff). easy to fit, just need to drill a hole.

now that I've bought mine I just keep it in my helmet bag with licence and helmet etc so that I never forget to take it to a track day/sprint/whatever.

Duncan Grand Master

Duncan

Posted
Posted

I'm surprised you need a secondary restraint for a skyline, its certainly not required in the CAMS regs (late model cars don't need an additional restraint). Unless it is requried by the supplementary regulations, I haven't seen them

Beer Baron Grand Master

Beer Baron

Posted
Posted

Yeah some events now are starting to require them now even for late model cars. Up till now later model cars with an un-modified 2 stage factory catch have been ok, but for some reason of late it seems they are moving towards making all cars use a secondary restraint. Even a recent drift day I attended required all cars to have one and that is classed as a non-speed event!

Still for $25 and 5 mins drilling a hole it's not too onerous. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...