Jump to content
SAU Community

Recommended Posts

  • Replies 142
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i now know the reason. clutch is fried. went to do the same type of launch just before and grabs middle of 1st gear then just revs and goes no where :banana: and a little bit at the top of 2nd. rest of the gears are ok. reason for my mph?

new clutch time. whats a good clutch for the power im making. dont want to limit myself either so say up to 260rwk. and need it to last.

i love the assumptions stating i dont have 220rwk. your a moron. i run a hiflow turbo on 13 psi producing 220.6rwk to be exact. shit tyres my friend. if you can do better with my tyres then go ahead

Im not a moron, nor is Adrian. Adrian has raced for a long time, and i did for a while years ago.

You get to workout via expirience what is and isnt true, its not really an assumption, its educated knowledge. :)

220rwkw is NOT 106mph, you need another 5mph at least IMO.

But yeah, slipping clutch could cause the MPH to be down if it was slipping, but sounds like its only just started?

Get it fixed and have another crack

yea it was slipping on the track definately. 1st gear would rev fine to middle of 1st then slip. my friend who was at calder confirmed it cause there was no wheelspin when i took off normally then punched it. clutch was smelling worse and worse after every run. last 2 runs were in the high 14's at 103mph.

im ordering a new clutch on monday and we'll see how it goes. getting an exedy cushioned button.

thanks for all your help people.

Clutch normally slips in the higher gears under the load of the higher gearing?!?!?!?!?!

Just to shed some light on what people are saying re mph. I went to Calder a while ago. My times ranged from 14.2 to 12.9. The mph was always 2-3mph and typically between 110-113mph with about 215-220rwkws

Im not a moron, nor is Adrian. Adrian has raced for a long time, and i did for a while years ago.

You get to workout via expirience what is and isnt true, its not really an assumption, its educated knowledge. :rolleyes:

220rwkw is NOT 106mph, you need another 5mph at least IMO.

I *know* you guys aren't morons and have heaps of experience racing, but saying "220rwkw is NOT 106mph" is ridiculous. Saying its wrong IS an assumption, and given he has a dyno plot for it - is a completely irrefutably incorrect assumption. The fact that it doesn't equate with the dyno you use doesn't change the fact it read 220rwkw on the dyno he ran it on which obviously reads different (not wrong) to what yours does.

DON'T pay too much attention to the dyno results, you're right in focussing on the trap speed as indication of the cars true power. A dyno result however isn't a completely level measuring stick for a cars true power - so you can't realistically (unless you are well used to the particular dyno) make any kind of educated guess on what trap speed it should or shouldn't do for a given power level .

Most people, with a R33GTS-t 220rwkw, run 110-111mph

So its not just 'one' result here, its a culmination of many that one can only gain from talking to people, working out thier results vs thier power.

Now, if your sitting outside the 'norm' then obviously something is either wrong or missing.

Variations should be minor across the board for things like this unless your changing the variables like weight, power and so on.

Its a good indicator (mph vs dyno) from what ive seen, and im happy to keep using it as such - this is provided the run is 'clean'.

Especially once you yourself become consistent, its a very very good gauge of things.

I could get a dyno sheet with 260rwkw on it and run 106mph - again, which is lying? The dyno. Clearly.

But - as we've now been informed, the clutch wasnt perfect, so that is a key point to note as power ISNT being transferred and is therefore a changing of one variable that effects the end result.

Could be the track surface.I had crap tyres on my 250rwkw R33 and had little wheelspin.That was a WSID.

13 flat at 113MPH with 2.0 60footers couldnt get 3rd gear all night.(practise practise practise)

i ran a 13.5@106mph with touch over 200rwkw rb20 r32, a slight amount of wheel spin but nothing to stupid...

on another note ive seen first hand a rx2 run a 10.4@110mph<please explain as when i watched the run i couldnt understand how it did it, the driver didnt back off either.

my quickest time is 13.173 @ 107mph with a 2.119sec 60ft, that is on talon triangles(cheep tyres) on r22 stock rims with tyre pressures at 16psi, i have got around 260rwhp, i rev quite high when i launch and give the clutch a hard time by keepn the revs up while trying not to spin the tyres, i have a few incar vids ill put on youtube of me at the drags and then put link on here

ive seen first hand a rx2 run a 10.4@110mph<please explain as when i watched the run i couldnt understand how it did it, the driver didnt back off either.

did he have big slicks on and get it off the line real well? depends on his gearing, his car might just be set up to boogy off the line but die in the ass at the other end

Just so it's clear, wheelspin, track prep or lack thereof or the shittiest of launch has absolutely NOTHING to do with mph. In fact, in most cases a slightly slower 60' time reults in a n extra mph put on in the top end.

i am finding it amusing that you get on here asking for help, abuse people when they give you good advise, then

turn around asking more questions. seeing that you all ready know everything. Funny. :laughing-smiley-014:

Suggest the pulling in of your head is necessary as these people have the time slips to prove it, dyno sheets mean fcuck

all mate. Your about 6mph short for a 12 and your clutch will slip in the higher gears if it was shot.

i now know the reason. clutch is fried. went to do the same type of launch just before and grabs middle of 1st gear then just revs and goes no where :) and a little bit at the top of 2nd. rest of the gears are ok. reason for my mph?

new clutch time. whats a good clutch for the power im making. dont want to limit myself either so say up to 260rwk. and need it to last.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...