Jump to content
SAU Community

Recommended Posts

Thought I would add this to try and dig up some info

The picture below is the brains for the 4WD system on the GIO GTR.

Its has removable chips for different 4WD bias. Now we just have to figure what the hell it all means. If anyone has any info it would be great to chat to you. The car came with two of these box's and three different numbered chips.....one of the box's was marked wet setup but it appears to have the same chip in it as the dry box. Which makes be think, being that it understeers quite badly at the moment as soon as you start clicking up to different setting that both box's have wet chips in it. Info would be great....would save us time and money on test days.

cheers

Craig

post-37023-1274220474_thumb.jpg

The way I understand it in that 1st clip where skaife explains it 'wet chip is used for the rain for constant 4wd' so it must bypass the g sensor, similar to the torque converter switch I have in my gtr 'extreme tsc' brand

  • 2 months later...

More crack smoking Roy? :thumbsup: lol

My bucket of bolts 32 on road tyres is quicker around Lakeside the Seto in a Group A 80's era Mustang on slicks. In fact I think it's quicker than any of the Group A's that have visited the track in recent years?

Seto in the M3 was damn quick at PI last year. Showed how quick the old buses go if steered hard.

But i agree, that there are plenty of road-track cars that are near as quick/quicker then these things. But thats not the point, I have seen what goes into the build/resto of these things and you can understand why they are not drive a 10/10ths. There is still a level of bespoked engineering and hard to find parts in these cars so who would want to break them....lol I am about dumb enough to get caught up in the moment and push . But ey that lack of self control translates to why in this lifetime I will never have the money to buy and punt one of these cars :thumbsup:

And Marlin, you may be perhaps quicker...but your thing will never scream like the 31s :)

oh...edit...looking at Natsoft i cant see the times form last Spetember. I cant see anything about their last visit to Lakeside regarding times or a Mustang being entered...or Was Seton there just testing a car at a non race day?

I would love to build a replica of the Dick Johnson Mustang, Could flog the ass off it and not care, the fox body mustangs are worth sweet FA in the states anyhow.

probably the equivalent of buying a vn commodore here lol

if its registered & has new tyres, its worth more haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...