Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I got my series 2 stagea stock as and was getting about 350ks a tank, so i had a carbon clean done on the fuel system cost me $120 and i was then getting 450km to 550km a tank then I had aftermarket ecu, intercooler, fuel pressure regulator, splitfire ignition coils, 3 inch mandrel turbo back exhaust, eboost2 running 14 psi, 500hp intank fuel pump, apexi power intake, and now i get around 300kms to 350kms a tank now I want to sell the beast.

I got my series 2 stagea stock as and was getting about 350ks a tank, so i had a carbon clean done on the fuel system cost me $120 and i was then getting 450km to 550km a tank then I had aftermarket ecu, intercooler, fuel pressure regulator, splitfire ignition coils, 3 inch mandrel turbo back exhaust, eboost2 running 14 psi, 500hp intank fuel pump, apexi power intake, and now i get around 300kms to 350kms a tank now I want to sell the beast.

hey ben you sound like your driving like your username suggests, but on a more serious note i hope your not running 14psi on a std turbo, and have you had the car tuned since doing mods, fuel usage is way to high , if your driving hard ok consumption is always gunna be shit, but with your mods and tuned properly you should be doing better than that,

anyway hope you sus it out rather than sell it,

goodluck leigh.

I just filled up 59.91lt to the brim, I had done 407k's and it works out to about 14.7/100k's after my first full tank on my stag (only just got it :nyaanyaa: )

thats with a bit of a lead foot throughout the whole tank.... :cheers:

my question is - when the empty light comes on - how many litres does that mean it has left in the tank??

when the empty light came on in my 34 i had 15lt left in the tank......

Edited by FULOCK

well then i must try and drive my car till it get really low. i have only ever been able to squze 55 lt into my car whenever i have filled it up and i normally have driven anywhere from 450 to just over 500 km when i fill up. it seems to me that there is still a fair bit of fuel left when the gauge reads empty.

FULOCK i usually always put fuel in once the light comes on and I always get 58L in... so if the tank is 68L (as said a couple of posts before yours :D) then you'd have 10 ltrs once the fuel light comes on.

Edited by StageaGirl
hey ben you sound like your driving like your username suggests, but on a more serious note i hope your not running 14psi on a std turbo, and have you had the car tuned since doing mods, fuel usage is way to high , if your driving hard ok consumption is always gunna be shit, but with your mods and tuned properly you should be doing better than that,

anyway hope you sus it out rather than sell it,

goodluck leigh.

Yeah had it tuned and yes i am running 14psi on standard turbo was told that was the maximum it could handle. I have wondered if I should take it to someone else to see if it has been tuned do you know of anyone i live on the gold coast

Yeah had it tuned and yes i am running 14psi on standard turbo was told that was the maximum it could handle. I have wondered if I should take it to someone else to see if it has been tuned do you know of anyone i live on the gold coast

Hey buddy just reiterating what others have said.

14psi is what it takes to pretty much kill the turbo instantly. You'd want to step down from 14 a fair bit to make it safe enough to last.

I had mine on 11psi and I think you'll find most people on here keep it around 10-11psi with the stock turbo.

Replacing the turbo with something as good or better is going to be an expensive operation but you do have options and the cost varies from ~$1000 to ~$2500 depending on what you want...and the more expensive ones aren't always better. :P

Mine was averaging 13-14L/100km on the standard turbo (8psi) and 10L/100km on the highway.

Try to get it fixed a bit before selling it cos it will really harm your sale price if the fuel economy isn't great.

I have a M35 Stage and arount town I get about 14L / 100 and on the highway I average 10L / 100

I've done 2 full tanks in city driving (90% of the time just feathering the gas pedal). Both occasions have clocked 500kms which is about 6.25 kms per litre of fuel, or 16L/100kms.

For a later model engine, i think that's pretty pathetic. One of the reasons why I sold my R34 was to get something that gives you good mileage. It's certainly disappointed me so far..

Another note. Spoke to Tony from North Shore Prestige where I got the car from. He suggested a few things to increase economy.

- change plugs

- clean injectors (if they do need cleaning but unlikely he said)

- clean the afm

- get an ebc so you can wind down the boost to say 5 pounds when you dont need the power.

- dont drive with a heavy foot, which im not anyway.

Another note. Spoke to Tony from North Shore Prestige where I got the car from. He suggested a few things to increase economy.

- change plugs

- clean injectors (if they do need cleaning but unlikely he said)

- clean the afm

- get an ebc so you can wind down the boost to say 5 pounds when you dont need the power.

- dont drive with a heavy foot, which im not anyway.

I am getting around 7.5km/litre around town and if I can get some highway driving in (M2 or M5) I am getting this up to 7.8 - 8.0. It is driving a bit like an old lady and not being in a hurry but even when pushing a bit harder I can still get 7.5. The difference seems to be if you can keep moving. The stop start traffic kills the economy.

Cheers

Andy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...