Jump to content
SAU Community

Recommended Posts

spotted a black r33 in murray bridge this morning :P

hey i spotted a black 33 in the Bridge as well.....had a SAU sticker on the rear window

waves exchanged but the driver was prob sh*ting himself getting a wave from me in my work car lol

clean 33 mate

Nice 33 GTR (midnight purple or black) parked in the Goody hotel carpark tonight and a silver Stag with the new S plates turning left onto Morphett St from Hindley St around 8ish....

just spotted a silver r33 with 5 spokers in front of noarlunga, boosting and chirping the tires around the corner

same guy who give me crusty looks at BP i think

clean as dark grey r33 same spot as above

also silver v35 dominos noarlunga

was the 33 with 5 spokes a 4 door?

jealous of what???

u or the car???

ya both whinge whine and have mood swings as bad as each other so ill pass :blush:

hahahahahahahaha niocely said carl :wacko:

hey i spotted a black 33 in the Bridge as well.....had a SAU sticker on the rear window

waves exchanged but the driver was prob sh*ting himself getting a wave from me in my work car lol

clean 33 mate

did it have p plates on it with BB***** number plates?

did it have p plates on it with BB***** number plates?

I am pretty sure it did lol

Ohh and going back home last night got Nathan in his 32 to pull over while i was in my work car lol

he was packing it......so what you said about me being behind you cara is true.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...